- Újdonságok
- Akciós termékek
- Raktáron (szállítás 2-4 nap)
- Outlet
- Konverter, vonalerősítő, hub
- Soros - Ethernet konverter, RS-232, RS-422, RS-485
- Ethernet switch
- PAC - PLC - Érintőképernyős PLC - HMI
- ICP DAS Bővítő kártyák # X-Board, XV-Board, XW-Board
- RS-485 portos terepi I/O [Modbus, DCON]
- Ethernet I/O modulok
- USB I/O modulok
- Profibus [konverter, vonalerősítő, átjáró, I/O, csatlakozó, kábel]
- Modbus modulok
- CAN modulok, kártyák
- CANopen modulok, kártyák
- DeviceNet modulok, kártyák
- SAE J1939 modulok
- HART modulok
- EtherNet/IP modulok
- BACnet/IP modulok
- BACnet MS/TP modulok
- PROFINET modulok
- EtherCAT modulok
- M-Bus [Meter-Bus] modulok
- W-MBUS [Wireless-MBUS]
- DALI (Digital Addressable Lighting Interface)
- Data Highway Plus
- PLC programozó kábel és szerszámgép kábel a legtöbb ismert márkához
- Jelkondícionáló modul
- Ipari Panel PC
- Ipari számítógép
- Ipari notebook és tablet
- Ipari és kereskedelmi monitor
- HMI kijelzők
- WiFi eszközök
- Fogyasztásmérés, PMMS, mérőleolvasás, teljesítménymérő gyűjtés
- GSM, GPRS, SMS, GPS, M2M
- ZigBee termékek
- Rádió modem [RF modem, LoRa modem]
- Modbus rádió modemek, RF, 868 MHz
- LoRaWAN eszközök
- SIGFOX eszközök
- Bluetooth
- Infra port, IrDa
- Industrial Internet of Things (IIoT) [MQTT protokoll]
- Ethernet média konverter, extender
- Touch Pad
- Optikai leválasztó, szigetelő, villám és túlfeszültség védelem
- Motion és gépadat gyűjtés
- Hőmérséklet, páratartalom, megvilágítás adatgyűjtő
- PC és külső bővítő kártyák - adatgyűjtés, I/O és interfész (PCI, UPCI, ISA, PCI Express, stb.)
- Épület és Home automatizálás
- KNX termékek
- Kiegészítők (kábel, csatlakozó, stb.)
- Tápegységek
- Automatizálás, vezérlés, szabályozás eszközei
- Machine Vision ipari kamerák és tartozékok
- Kifutott termékek

CAN-2019C/S # I/O Modul/CANopen/Slave/10AI/univerzális/DB-1820 sorkapocs, ICP DAS
- CAN-2019C/S # I/O Modul/CANopen/Slave/10AI/univerzális/DB-1820 sorkapocs, ICP DAS
- CAN-2019C/S2 # I/O Modul/CANopen/Slave/10AI/univerzális/DB-1822 sorkapocs, ICP DAS
- CAN-2019C/S # CANopen Slave Module of 10-channel Universal Analog Input Include CAN-2019C module and a DB-1820 daughter board
- CAN-2019C/S2 CR # CANopen Slave Module of 10-channel Universal Analog InputInclude CAN-2019C module, a DB-1822 daughter board and a 1.8m Cable
- 10 univerzális analóg bemenet, differenciális
- Feszültség: +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V, +/- 5V, +/- 10V
- Áram: +/-20mA,(Requires Optional External 125 Ohm Resistor)
- Hőelem: J, K, T, E, R, S, B, N, C
-
CAN-2019C/S # I/O Modul/CANopen/Slave/10AI/univerzális/DB-1820 sorkapocs, ICP DAS
CAN-2019C/S2 # I/O Modul/CANopen/Slave/10AI/univerzális/DB-1822 sorkapocs, ICP DASCAN-2019C/S # CANopen Slave Module of 10-channel Universal Analog Input Include CAN-2019C module and a DB-1820 daughter board
CAN-2019C/S2 CR # CANopen Slave Module of 10-channel Universal Analog InputInclude CAN-2019C module, a DB-1822 daughter board and a 1.8m CableCAN-2019C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the thermocouple input status and set the configuration by using standard CANopen protocol. CAN-2019C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. The CAN-2019C is a 10-channel universal analog input CANopen slave module with voltage and current input types. It provides extremely accurate thermocouple measurement and automatically cold-junction compensation for each channel. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.
CANopen Interface Connector 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) Baud Rate (bps) 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M, selected by rotary switch Terminator Resistor DIP switch for the 120 Ω terminator resistor Protocol CANopen CiA 301 ver4.02, CiA 401 ver2.1 Node ID 1~99 selected by rotary switch NMT Slave Error Control Node Guarding protocol / Heartbeat Producer SDOs 1 server, 0 client PDOs 10 RxPDO, 10 TxPDO (Supports dynamic PDO) PDO Modes Event-triggered, remotely-requested, synchronous (cyclic), synchronous (acyclic) Emergency Message Yes EDS file Yes Analog Input Channels 10 (Differential) Input Type +/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V, +/- 5V, +/- 10V
+/-20mA,(Requires Optional External 125 Ohm Resistor)
Thermocouple (J, K, T, E, R, S, B, N, C)Resolution 16-bit Sampling Rate 10 Samples/Sec. (Total) Accuracy +/-0.1% FSR Zero Drift +/-10 uV/°C Span Drift +/-25 ppm/ °C Common Mode Rejection 86 dB Min. Normal Mode Rejection 100 dB Input Impedance >400 kΩ Individual channel configuration Yes Open Thermocouple Detection Yes Over voltage protection 240 Vrms ESD Protection +/-4kV, Contact for each terminal. Intra-module Isolation, Field to Logic 3000 VDC LED CANopen Status 3 LEDs to PWR, RUN and ERR Power Power Supply Unregulated +10 ~ +30 VDC Power Consumption 1.5 W Mechanism Installation DIN-Rail Dimensions 33 mm x 99 mm x 78 mm ( W x L x H ) Environment Operating Temp. -25 ~ 75 ℃ Storage Temp. -30 ~ 80 ℃ Humidity 10 ~ 90% RH, non-condensing Hőelem típusok Type Code Temperature Range (°C) J -210 °C ~ +1200 °C K -270 °C ~ +1372 °C T -270 °C ~ +400 °C E -270 °C ~ +1000 °C R -50 °C ~ +1765 °C S -50 °C ~ +1765 °C B 0 °C ~ +1820 °C N -270 °C ~ +1300 °C C 0 °C ~ +2320 °C CAN-2019C/SCANopen Slave Module of 10-channel Universal Analog Input Include CAN-2019C module and a DB-1820 daughter boardCAN-2019C/S2 CRCANopen Slave Module of 10-channel Universal Analog Input
Include CAN-2019C module, a DB-1822 daughter board and a 1.8m Cables!nus-elektrotechnikai bt.
Industrial IT & Automation
23 éves jubileum / 23 th Anniversary
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2020 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
-
Gyártó ICP DASRaktárkészlet NINCSCikkszám CAN-2019C-SStátusz Rendelésre 4-10 munkanap