Digital astronomical clock CRONOS is designed to control electrical circuits. The user can program multiple enable/disable cycles depending on requirements.
Enabling and disabling the circuits may be associated with sunrise, sunset or programmed to any time of a day. Current time is set automatically after filling in geographical coordinates(Latitude, Longitude).
Enable/disable times are entered into the device using “crontab” table format commonly used in Linux systems. This table format allows almost unlimited possibilities to configure time interval settings. Extension in relation to the crontab is a built-in astronomical clock calculating the hours of twighlight (civil, nautical, astronomical). It is possible to execute the programmed commands before or after the event (ie. 1 hour before sunrise, 5 minuts after sunset).
Built-in clock has the ability to automatically synchronize time with Internet Server (SNTP) and supports daylight saving time (summer and winter time).
In any case control of channels can also be carried out by the LAN.
Switching table can be entered in several ways:
- by the built-in web editor,
- by keyboard and display
- by the file on a USB flash drive.
Besides built-in relays, Cronos can also control other devices through the LAN. Supported protocols are as follows :.
- TCP
- UDP
- UDP Multicast
- HTTP GET request (the ability to control for example Lantick)
- KNX-IP in routing mode
The user defines what data will be sent by the protocol and gives the frame a name. This name is then entered as a command in the crontab table. When event associated with this name is triggered the Cronos will sends the frame over selected protocol.
Web panel is protected by administrator password and user password. The device keyboard can also be locked to prevent unauthorized access. Unlocking is also possible by inserting a memory stick with a file cronos.key which contains the same password as entered in www panel.
The device is equipped with an LCD display which displays following values:
- the current date and time
- time of sunrise based on geographical location
- time of sunset based on geographical location
- current status of the relay output
- keypad lock status
Cronos has the function of activity simulation, which means that in case of the power failure and after some time when the power is back, the state of the relays will be preserved like there was no break.
All of the Cronos parameters can be modified using front panel buttons.
The current configuration can be saved as a file on a memory stick.
Cronos is produced in two versions of power supply: 12-24V DC or 230VAC.
The device enclosure is DIN rail mountable.
Bővített forgalmazói/gyártói információk (EU 2023/988 rendelet)
Kereskedelmi név: SINUS-ELEKTROTECHNIKAI BT.
Postai cím: 9028 Győr, Móra tér 17.
Elektronikus cím: https://www.s-e.hu/
|
s!nus-elektrotechnikai bt.
Industrial IT & Automation
|
|
Ipari IT és Automatizálás 1997 óta
www.s-e.hu # www. icpdas.hu
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
|
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2025 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
