Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírlevél
Tanúsítvány
SSL Certificate
Ajándékot keres?

Házhozszállítás

Termék részletek
Főkategória >DeviceNet modulok, kártyák >DeviceNet átjáró
 
 

GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS

Rendelésre 4-10 munkanap
Raktárkészlet: NINCS
GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
134 241 Ft 170 486 Ft
db Kosárba Kosárba
  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
  • GW-7243D-G CR # DeviceNet Slave / Modbus Master Gateway (RoHS)

 

  • Group 2 Only Server DeviceNet subscriber
  • Support Explicit and Poll Connection
  • User can select the Modbus RTU/ASCII protocol for each COM port
  • Maximum support 10 Modbus RTU/ASCII commands for each COM port
  • Maximum support 4 Modbus TCP devices
  • Maximum support 5 Modbus TCP commands for each Modbus TCP device
  • Support Modbus function codes: 0x01，0x02，0x03，0x04，0x05，0x06，0x0F and 0x10
  • Maximum support 2048 channels DI，2048 channels DO，1024 channels AI and 1024 channels AO for each Modbus TCP device
Részletek Adatok

  • GW-7243D # Átjáró, Gateway/DeviceNet Slave - Modbus Master/RS232/485/Ethernet/LED, ICP DAS
    GW-7243D-G CR # DeviceNet Slave / Modbus Master Gateway (RoHS)

     

    The GW-7243D offers the DeviceNet slave and Modbus master functions, and enables the DeviceNet master to access the Modbus slave devices. In the DeviceNet network, the module acts as a Group 2 Only Server device, and waits to build the connection with the DeviceNet master. In the Modbus network, the GW-7243D is a master device, and cyclically sends the commands to access the Modbus slave devices. Both the Modbus TCP client and Modbus RTU/ASCII master interfaces of the GW-7243D can work simultaneously. This feature means that users are able to integrate different kinds of Modbus slave devices together into the DeviceNet network no matter these devices provide Ethernet, RS-232 or RS-485 communication interfaces. In order to simplify the use of the GW-7243D, the GW-7243D Utility tool for confi guration and EDS file production is given. This is helpful to build the applications easily and quickly.

     

    DeviceNet Features
    • Comply with DeviceNet specification Volume I/II, Release 2.0
    • “Group 2 Only Server” DeviceNet subscriber
    • On-line change baud rate and MAC ID of CAN
    • MS.NS and IO Led indicators
    • Support Offline Connection Set and Device Shutdown Message
    • Explicit & I/O length: 240 bytes max.
    • Connection supported:
    • one “Explicit Connection”
      • one “Polled Command/Response” connection
    Modbus RTU Features
    • User can select the Modbus RTU/ASCII protocol for each COM port
    • Maximum support 10 Modbus RTU/ASCII commands for each COM port
    • Support Modbus function codes: 0x01，0x02，0x03，0x04，0x05，0x06，0x0F and 0x10
    • Support communication speed: 1200、2400、4800、9600、19200、38400、57600 and 115200 bps
    • Data bits: 7 or 8 bits
    • Parity bits: None, even or odd
    • Stop bits: 1 or 2 bits
    • Maximum support 1920 channels DI/O for a Modbus RTU/ASCII command
    • Maximum support 120 channels AI/O for a Modbus RTU/ASCII command
    • Maximum support 2048 channels DI，2048 channels DO，1024 channels AI and 1024 channels AO for each COM port
    Modbus TCP Features
    • Maximum support 4 Modbus TCP devices
    • Maximum support 5 Modbus TCP commands for each Modbus TCP device
    • Support Modbus function codes: 0x01，0x02，0x03，0x04，0x05，0x06，0x0F and 0x10
    • Maximum support 1920 channels DI/O for a Modbus TCP command
    • Maximum support 120 channels AI/O for a Modbus TCP command
    • Maximum support 2048 channels DI，2048 channels DO，1024 channels AI and 1024 channels AO for each Modbus TCP device

     

     

     

     

     

    The GW-7243D Utility helps users to configure the devices, and has following features:

    • Support module IP/Gateway/Mask setting
    • Support DeviceNet node ID, baud rate setting
    • Support Com port communication setting
    • Support Modbus TCP/RTU/ASCII protocol communication parameters setting
    • Support DeviceNet Polling I/O connection path setting
    • Show Modbus TCP/RTU/ASCII protocol communication parameters
    • Show DeviceNet Application Objects configuration
    • Dynamic produce EDS file after setting

     

    Code
    Name
    Description
    01 (0x01)
    Read Coil Status
    Read the ON/OFF status of discrete outputs in the slave
    02 (0x02)
    Read Input Status
    Read the ON/OFF status of discrete inputs in the slave
    03 (0x03)
    Read Holding Registers
    Read the binary contents of holding registers in the slaves
    04 (0x04)
    Read Input Registers
    Read the binary contents of input registers in the slaves
    05 (0x05)
    Write Singal Coil
    Force a single coil to either ON or OFF
    06 (0x06)
    Write Single Register
    Preset a value into a single holding register
    15 (0x0F)
    Force Multi Coils
    Forces each coil in a sequence of coils to either ON or OFF
    16 (0x10)
    Preset Multi Registers
    Preset value into a sequence of holding registers
    		 
     
     
       
    Hardware
    EEPROM
    16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
    Watchdog
    Watchdog IC
    CAN Interface
    Controller
    NXP SJA1000T with 16 MHz clock
    Transceiver
    NXP 82C250
    Connector
    5-pin screwed terminal block (CAN_L, CAN_H, N/A for others)
    Isolation
    1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
    Protocol
    DeviceNet Volume I ver2.0, Volume II ver2.0
    UART Interface
    COM 1
    RS-232
    COM 1 Connector
    5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
    COM 2
    RS-485 (Self-turner inside)
    COM 2 Connector
    2-pin screwed terminal block (DATA+, DATA-)
    Protocol
    Modbus ASCII / Modbus RTU
    Ethernet Interface
    Controller
    10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
    Connector
    RJ-45 with LED indicator
    Protocol
    Modbus TCP
    Power
    Power supply
    Unregulated +10 ~ +30 VDC
    Protection
    Power reverse polarity protection, Over-voltage brown-out protection
    Power Consumption
    2.5 W
    Mechanism
    Dimensions
    72mm x 122mm x 33mm (W x L x H)
    Environment
    Operating Temp.
    -25 ~ 75 ℃
    Storage Temp.
    -30 ~ 80 ℃
    Humidity
    10 ~ 90% RH, non-condensing
    		 
     
     
       
    GW-7243D-G CR
    DeviceNet Slave / Modbus Master Gateway (RoHS)

     

      s!nus-elektrotechnikai bt.

      Industrial IT & Automation

     

    23 éves jubileum / 23 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 

     

    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter

     

    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.