Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírek
2022.01.06
MOXA árváltozások
2021.11.30
ICP DAS év végi rendelési információk
2021.11.22
Árváltozás
Továbbiak »
Hírlevél
Tanúsítvány
SSL Certificate
Ajándékot keres?

Házhozszállítás

Termék részletek
Főkategória >EtherNet/IP modulok >EtherNet/IP átjáró
 
 

GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS

Raktáron (szállítás 2-4 nap)
Raktárkészlet: VAN
GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
47 617 Ft 60 474 Ft
db Kosárba Kosárba
  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
  • GW-7472 CR # EtherNet/IP to Modbus RTU/TCP Gateway

 

  • EtherNet/IP - Modbus RTU/TCP átjáró
  • 30 Modbus RTU parancs támogatása
  • 10 Modbus TCP Server támogatás
  • TCP, UDP, DHCP, BOOTP és TFTP protokollok
  • Egyszerű firmware frissítés az Etherneten keresztül
  • Allen-Bradley ControlLogix Logix 5563 PLC-vel is használható Ethernet/IP - Modbus TCP/RTU átjáró
  • Használható Hilscher CIFX 50-RE Ethernet/IP masterrel 
  • DIN sínre rögzíthető

We have confirmed that GW-7472 can operate normally with Allen-Bradley “ControlLogix Logix 5563” through “1756-ENBT ControlLogix EtherNet/IP Module” setup by “RSLogix 5000 software”.

This device ever tested with the Hilscher CIFX 50-RE Ethernet/IP master. It can communicate with the master via following I/O connection
methods.
(1) Transport and trigger: Exclusive-Owner, Cyclic
(2) Original to Target Type: POINT2POINT, (MULTICAST not supported)
(3) Target to Original Type: POINT2POINT, MULTICAST

Részletek Adatok

  • GW-7472 CR # Átjáró/Gateway/EtherNet IP - Modbus TCP/RTU/PoE/RS-422/485, ICP DAS
    GW-7472 CR # EtherNet/IP to Modbus RTU/TCP Gateway

     

    The GW-7472 (EtherNet/IP adapter to Modbus RTU Master and Modbus TCP Client Gateway) is helpful for data-exchanging between the Modbus RTU Network, Modbus TCP Network, and the EtherNet/IP Network. It reads the register data from the Modbus RTU slaves as well as Modbus TCP servers and publishes these data to the input register data of the EtherNet/IP scanner. The output data transmitted by the EtherNet/IP scanner are updated to the register data of Modbus RTU slaves/Modbus TCP servers via the GW-7472. In order to save the installation space, the GW-7472 is offered in an amazing tiny form-factor that makes it easy to install in anywhere, even directly attached to a serial device or embedded into a machine. The GW-7472 features a powerful 32-bit MCU to handle efficient network traffic and it provides the IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) with a standard category 5 Ethernet cable. Through the NS-205PSE, Poe switch, the GW-7472 can be powered via the Ethernet cable. When there is no PoE switch on site, the GW-7472 provide another way to be powered from DC adapters. These two power interfaces are redundant. If one fails, another will take it over to supply the proper power to the GW-7472.

    For Allen Bradley users:  It is tested and confirmed that the GW-7472 can be connected to the Allen-BradleyTM ControlLogix Logix 5563 through the 1756-ENBT ControlLogix EtherNet/IP Module successfully. The configuration software is RSLogix 5000.

     

    General Features:

    • Powerful 32-bit MCU handles efficient network traffic
    • 10/100 Base-TX Ethernet, RJ-45 x1
    • (Auto-negotiating, auto MDI/MDIX, LED Indicators)
    • Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
    • Automatically RS-485 direction control
    • Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
    • Easy firmware update via Ethernet
    • Removable terminal block connector
    • Tiny form-factor and low power consumption
    • RoHS compliant with Halogen-free
    • Fire retardant materials (UL94-V0 Level)


    EtherNet/IP Features:

    • Ethernet Protocol: EtherNet/IP adapter
    • Maximum number of connections for Explicit Messages: 6
    • Maximum number of connections for Implicit Messages: 1
    • Supported I/O connection methods:
      1. Transport and trigger: Exclusive-Owner, Cyclic
      2. Originator to Target Type: POINT2POINT
      3. Target to Originator Type: POINT2POINT, MULTICAST
    • Device Configuration Option: EDS, Utility tool
    • Address Configuration: DHCP, Utility tool
    • EtherNet/IP Input/Output command data size: maximum 500 bytes
    • The numbers of the Modbus RTU slave and Modbus TCP servers input registers mapping to the input registers of the EtherNet/IP adapter of the GW-7472: maximum 500 bytes
    • The numbers of the Modbus RTU slave and Modbus TCP servers output registers mapping to the output registers of the EtherNet/IP adapter of the GW-7472: maximum 500 bytes


    Modbus Features:

    • Modbus Protocol: Modbus RTU Master
    • Maximum support 30 Modbus RTU commands
    • Maximum support 10 Modbus TCP servers
    • Maximum support 8 Modbus commands for each one Modbus TCP server
    • Supported Modbus RTU Function Codes:
      1. 01 hex: Read Output Status
      2. 02 hex: Read Input Status
      3. 03 hex: Read Multiple Data Registers
      4. 04 hex: Read Input Registers
      5. 0F hex: Write Multiple Bits
      6. 10 hex: Write Multiple Data Register
    • Maximum data size of one Modbus command: 240 bytes
    		  
     
    Data Interchange  
    The GW-7472 is an EtherNet/IP Adapter with all the required EtherNet/IP objects. This section describes the EtherNet/IP Object Model and how to read/write the object data using EtherNet/IP Explicit and I/O messaging.

     

    Hardware
    CPU
    32-bit MCU
    UART Interface
    COM 1
    2-wire RS-485
    4-wire RS-422
    COM 1 Connector
    10-Pin Removable Terminal Block x 1
    Protocol
    Modbus RTU master and Modbus TCP client
    Ethernet Interface
    Ethernet
    10/100 Base-TX, 8-pin RJ-45 x 1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
    PoE (IEEE 802.3af, Class 1)
    Protocol
    EtherNet/IP Adapter
    Power
    Power supply

    PoE: IEEE 802.3af, Class 1
    DC jack: +12 ~ 48 VDC
    Power Consumption
    0.05 A @ 24 VDC
    Mechanism
    Dimensions
    52mm x 27mm x 77.4mm (W x L x H)
    Mounting
    DIN-Rail
    Environment
    Operating Temperature
    -25 ~ 75 ℃
    Storage Temperature
    -30 ~ 80 ℃
    Humidity
    10 ~ 90% RH, non-condensing
    		 
     
    Ordering Information  
    GW-7472 CR
    		 Tiny EtherNet/IP to Modbus RTU/TCP gateway with PoE and 1 RS-422/485 (RoHS)

     

      s!nus-elektrotechnikai bt.

      Industrial IT & Automation

     

    24 éves jubileum / 24 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 

     

    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter

     

    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.