I-2532 CR # CAN/Fiber Converter (RoHS)
Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference and has been used in harsh environment extensively. On the other hand, CAN bus is famous in industrial application. In order to solve the problem between different transmission medium, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.
The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economic solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.
|
CAN Interface
|
|
Connector
|
8-pin screwed terminal block (CAN_GND, CAN_L, CAN_H, N/A for others)
|
|
Baud Rate (bps)
|
10 k ~ 500 k
|
|
Transmission Distance (m)
|
Depend on baud rate
|
|
Terminator Resistor
|
Switch for 120Ω terminator resistor
|
|
Specification
|
ISO-11898-2, CAN 2.0A and CAN 2.0B
|
|
Fiber Interface
|
|
Connector
|
ST (Multi-mode)
|
|
Wave Length
|
850 nm
|
|
Fiber Cable
|
62.5 / 125 μm
|
|
Propagation Delay
|
125ns max (125ns delay shortens bus line length by ~ 25 m)
|
|
Transmission Distance (m)
|
1.4 km max (in 62.5/125 μm fiber cable)
|
|
LED
|
|
Round LED
|
PWR LED, TD LED, RD LED
|
|
Power
|
|
Power supply
|
Unregulated +10 ~ +30 VDC
|
|
Protection
|
Power reverse polarity protection, Over-voltage brown-out protection
|
|
Power Consumption
|
0.5 W
|
|
Mechanism
|
|
Installation
|
DIN-Rail
|
|
Dimensions
|
32.3mm x 77.5mm x 99.0mm (W x L x H)
|
|
Environment
|
|
Operating Temp.
|
-25 ~ 75 ℃
|
|
Storage Temp.
|
-30 ~ 80 ℃
|
|
Humidity
|
10 ~ 90% RH, non-condensing
|
|
Users can refer to the following table to know the maximum node numbers in each segment following ISO 11898-2 and the maximum segment length when using different type of wire.
|
|
|
Wire Cross-
Section [mm2]
|
The maximum segment length [m] under the
case of specific node number in this segment
|
|
16 Nodes
|
32 Nodes
|
64 Nodes
|
100 Nodes
|
|
~0.25 (AWG23)
|
< 220
|
< 200
|
< 170
|
< 150
|
|
~0.5 (AWG20)
|
< 390
|
< 360
|
< 310
|
< 270
|
|
~0.8 (AWG18)
|
< 590
|
< 550
|
< 470
|
< 410
|
|
~1.3 (AWG16)
|
<980
|
<900
|
<780
|
<670
|
|
|
|
Higher attenuation of fiber will reduce the transmission distance. Users can use following table to know the relationship between those two.
|
|
|
Attenuation [dB/km]
|
Fiber Length [m]
|
|
2.8
|
<1400
|
|
4
|
<400
|
|
|
|
The limitation of baud on a CAN bus system is restricted by propagation delay. On the other hand, long bus length leads to long propagation delay. The relationship between baud and bus length is displayed below.
|
|
|
Baud [bit/sec]
|
Ideal Bus Length [m]
|
|
500K
|
< 100
|
|
250K
|
< 250
|
|
125K
|
< 500
|
|
50K
|
< 1000
|
|
20K
|
< 2500
|
|
10K
|
< 5000
|
|
Bővített forgalmazói/gyártói információk (EU 2023/988 rendelet)
Kereskedelmi név: SINUS-ELEKTROTECHNIKAI BT.
Postai cím: 9028 Győr, Móra tér 17.
Elektronikus cím: https://www.s-e.hu/
|
s!nus-elektrotechnikai bt.
Industrial IT & Automation
|
|
Ipari IT és Automatizálás 1997 óta
www.s-e.hu # www. icpdas.hu
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
|
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2025 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
