I-7016PD # I/O Module/DCON/1AI/Nyúlásmérő/4DO/1DI/LED ICP DAS

The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also features 3000 VDC intra-module isolation.

Building Automation Factory Automation Machine Automation Remote Maintenance Remote Diagnosis Testing Equipment

Models I-7016P I-7016PD Strain Gauge Input Channels 1 Wiring 6-wire Sensor Types Full-Bridge Resolution 16-bit Accuracy ±0.05% of FSR Sampling Rate 10 Hz Input Impedance 20 MΩ Individual Channel Configuration - Overvoltage Protection ±5 VDC Open Wire Detection - Long Distance Measurement Yes Excitation Voltage Output Channels 1 Range 0 ~ +10 V Max. Load Current 40 mA Resolution 16-bit Accuracy ±0.05% Power-on Value Yes Digital Input Channels 1 Contact Dry Sink/Source (NPN/PNP) Source ON Voltage Level Close to GND OFF Voltage Level Open Counter (50 Hz, 16-bit) Yes Input Impedance 3 kΩ Overvoltage Protection ±30 VDC Digital Output Channels 4 Type Open Collector Sink/Source (NPN/PNP) Sink Load Voltage +3.5 ~ +50 VDC Max. Load Current 30 mA/Channel Power-on Value Yes Safe Value Yes

Models I-7016P I-7016PD Communication Interface RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) Format N, 8, 1 Baud Rate 1200 to 115200 bps Protocol DCON Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable) LED Indicator/Display System LED Indicator Yes, 1 as Power/Communication Indicator I/O LED Indicator - 7-Segment LED Display - Yes Isolation Intra-Module Isolation, Field-to-Logic 3000 VDC EMS Protection ESD (IEC 61000-4-2) 4 kV Contact for each Terminal 8 kV Air for Random Point EFT (IEC 61000-4-4) ±4 kV for Power Line Power Reverse Polarity Protection Yes Input Range +10 ~ +30 VDC Consumption 1.3 W Mechanical Dimensions (L x W x H) 123 mm x 72 mm x 35 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 to +75°C Storage Temperature -40 to +85°C Humidity 10 to 95% RH, Non-condensing

I-7016P CR 1-channel Strain Gauge Input Module using the DCON Protocol (6-wire) (Blue Cover) (RoHS) I-7016PD CR I-7016P with 7-segment LED Display (6-wire) (Blue Cover) (RoHS)

Sinus-Elektrotechnikai Bt.

ICP DAS HUNGARY

RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, ATOP, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

© 2018-2019  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva!

A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.