- Újdonságok
- Akciós termékek
- Raktáron (szállítás 2-4 nap)
- Outlet
- Konverter, vonalerősítő, hub
- Soros - Ethernet konverter, RS-232, RS-422, RS-485
- Ethernet switch
- PAC - PLC - Érintőképernyős PLC - HMI
- ICP DAS Bővítő kártyák # X-Board, XV-Board, XW-Board
- RS-485 portos terepi I/O [Modbus, DCON]
- I-7000 terepi I/O modulok [DCON protokoll, RS-485 port]
- M-7000 terepi I/O modulok [Modbus RTU és DCON protokoll, RS-485 port]
- tM-sorozatú terepi I/O modulok [DCON, Modbus RTU, Modbus ASCII ]
- M-2000 terepi I/O modulok [Modbus RTU és DCON]
- ICP DAS LC sorozatú I/O modulok (ház és épületautomatizáláshoz)
- Wellpro Modbus I/O
- Ethernet I/O modulok
- USB I/O modulok
- Profibus [konverter, vonalerősítő, átjáró, I/O, csatlakozó, kábel]
- Modbus modulok
- CAN modulok, kártyák
- CANopen modulok, kártyák
- DeviceNet modulok, kártyák
- SAE J1939 modulok
- HART modulok
- EtherNet/IP modulok
- BACnet/IP modulok
- BACnet MS/TP modulok
- PROFINET modulok
- EtherCAT modulok
- M-Bus [Meter-Bus] modulok
- W-MBUS [Wireless-MBUS]
- DALI (Digital Addressable Lighting Interface)
- Data Highway Plus
- PLC programozó kábel és szerszámgép kábel a legtöbb ismert márkához
- Jelkondícionáló modul
- Ipari Panel PC
- Ipari számítógép
- Ipari notebook és tablet
- Ipari és kereskedelmi monitor
- HMI kijelzők
- WiFi eszközök
- Fogyasztásmérés, PMMS, mérőleolvasás, teljesítménymérő gyűjtés
- GSM, GPRS, SMS, GPS, M2M
- ZigBee termékek
- Rádió modem [RF modem, LoRa modem]
- Modbus rádió modemek, RF, 868 MHz
- LoRaWAN eszközök
- SIGFOX eszközök
- Bluetooth
- Infra port, IrDa
- Industrial Internet of Things (IIoT) [MQTT protokoll]
- Ethernet média konverter, extender
- Touch Pad
- Optikai leválasztó, szigetelő, villám és túlfeszültség védelem
- Motion és gépadat gyűjtés
- Hőmérséklet, páratartalom, megvilágítás adatgyűjtő
- PC és külső bővítő kártyák - adatgyűjtés, I/O és interfész (PCI, UPCI, ISA, PCI Express, stb.)
- Épület és Home automatizálás
- KNX termékek
- Kiegészítők (kábel, csatlakozó, stb.)
- Tápegységek
- Automatizálás, vezérlés, szabályozás eszközei
- Machine Vision ipari kamerák és tartozékok
- Kifutott termékek

I-7060-G # I/O Module/DCON/4 Relay Signal/4DI, ICP DAS, ICP CON
- I-7060(D)/ M-7060(D)
- M-7060P/ M-7060PD
- 4-channel Isolated Digital Input and 4-channel Relay Output Module
- I-7060(D)/M-7060(D)
- 2 Form A és 2 Form C relé kimenet
- ±2 kV EFT védelem a tápfeszültségre
- M-7060P(D)
- 2 Form A és 2 Form C teljesítmény relé kimenet
- ±4 kV EFT védelem a tápfeszültségre
- ±3 kV túlfeszültség védelem a tápfeszültségre
- Sink és Source ttípusú digitális bemenet
- Minden digitális bemeneti csatorna használható 16-bites számlálóként
- Konfigurálható Power-on érték
- Konfigurálható Safe Value érték
- Dual Watchdog
- Széles működési hőmérséklet tartomány: -25 ~ +75°C
- Modbus RTU és DCON protokoll (M-7000)
- DCON protokoll (I-7000)
-
I-7060 CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Blue Cover) (RoHS) I-7060-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Gray Cover) (RoHS) I-7060D CR I-7060 with LED Display (Blue Cover) (RoHS) I-7060D-G CR I-7060-G with LED Display (Gray Cover) (RoHS) M-7060-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7060D-G CR M-7060-G with LED Display (Gray Cover) (RoHS) M-7060P-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7060PD-G CR M-7060P-G with LED Display (Gray Cover) (RoHS) The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P is the perfect solution for high power applications.- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Model I-7060 M-7060 M-7060P I-7060D M-7060D M-7060PD Relay Output Channels 4 (Form A × 2, Form C × 2) Relay Type Signal Relay Power Relay Form A Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDC16A @ 250 VAC
10 A @ 30 VDCMin. Contact Load 10 uA @ 10 mV 100 mA @ 6 V Contact Material Gold-plated silver Silver Tin Alloy Operate Time 3 ms 10 ms Release Time 2 ms 5 ms Mechanical Endurance 1 x 108 ops. 1 x 107 ops. Electrical Endurance 5 × 105 ops. 1 × 105 ops. Form C Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDCNO:10 A @ 250 VAC
NC:6 A @ 250 VACMin. Contact Load 10 uA @ 10 mV 100 mA @ 6V Contact Material Gold-plated silver Silver Tin Alloy Operate Time 3 ms 10 ms Release Time 2 ms 5 ms Mechanical Endurance 1 x 108 ops. 1 x 107 ops. Electrical Endurance 5 × 105 ops. 1 × 105 ops. Surge Strength 1500 VDC 2500 VDC Power-on Value Yes Safe Value Yes Digital Input/Counter Channels 4 Type Dry Contact - Wet Contact Sink/Source On Voltage Level +1 VDC Max. +4 VDC Max. Off Voltage Level +4 ~ 30 VDC +10 ~50 VDC Counters Max. Count 65535 (16-bit) Max. Input Frequency 100 Hz Min. Pulse Widt 5 ms Input Impedance 3 kΩ 10 kΩ Overvoltage Protection ±35 VDC ±70 VDC Model I-7060 M-7060 M-7060P I-7060D M-7060D M-7060PD Communication Interface RS-485 Modbus RTU, DCON Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) Baud Rate 1200 ~ 115200 bps Protocol DCON Modbus RTU, DCON Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable) LED Indicators/Display System LED Indicator Yes, 1 LED as Power/Communication Indicator I/O LED Indicators - Yes, 8 LEDs as Digital Input/Relay Output Indicators 7-Segment LED Display - Isolation Intra-Module Isolation, Field-to-Logic 3750 VDC EMS Protection ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal ±8 kV Air for Random Point EFT (IEC 61000-4-4) ±2 kV for Power Line ±4 kV for Power Line Surge (IEC 61000-4-5) - ±3 kV for Power Line Power Reverse Polarity Protection Yes Input Range 10 ~ 30 VDC Consumption 1 W 1 W 1.4 W 1.4 W 1.4 W 1.8 W Mechanical Dimensions (W x L x H) 72 mm x 123 mm x 35 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75°C Storage Temperature -40 ~ +85°C Humidity 10 ~ 95% RH, Non-condensing I-7060 CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Blue Cover) (RoHS) I-7060-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Gray Cover) (RoHS) I-7060D CR I-7060 with LED Display (Blue Cover) (RoHS) I-7060D-G CR I-7060-G with LED Display (Gray Cover) (RoHS) M-7060-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7060D-G CR M-7060-G with LED Display (Gray Cover) (RoHS) M-7060P-G CR 4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7060PD-G CR M-7060P-G with LED Display (Gray Cover) (RoHS) s!nus-elektrotechnikai bt.
Industrial IT & Automation
23 éves jubileum / 23 th Anniversary
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2020 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
-
Gyártó ICP DASRaktárkészlet NINCSCikkszám I-7060-G_CRStátusz Rendelésre 4-10 munkanap