SSL Certificate
Ajándékot keres?


Termék részletek

I-8817 # Controller/Intel80188/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS

Rendelésre 10-15 munkanap
I-8817 # Controller/Intel80188/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS
  • I-8817 # Controller/Intel80188/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS
181 658 Ft 230 705 Ft

  • I-8817 CR # Controller/Intel80188/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS
  • I-8817 CR # 4 slots ISaGRAF PAC (RoHS)
  • 80186, 40 MHz or 80186, 80 MHz CPU
  • MiniOS7 Inside
  • Development Software: ISaGRAF Ver.3
  • SRAM: 512 KB
  • Flash: 512 KB
  • 4/8 Slots for I-87K High/Low Profile I/O Modules
  • 10 M Ethernet Ports (for I-8x37-80)
  • 3/4 Serial Ports (RS-232/485)
  • Operating Temperature: -25 ~ +75 °C
  • I-8817 CR # Controller/Intel80188/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS
    I-8817 CR # 4 slots ISaGRAF PAC (RoHS)


    The ISaGRAF i-8000 Series (I-8437-80/8837-80, I-8417/8817) is an ISaGRAF PAC and includes ISaGRAF SoftLogic, ISaGRAF is a Windows programming tools and also provides powerful debugging tools including Online Monitor and Control and also Offline Simulation. There are more than 300 function blocks built-in the PAC for various Industrial Applications including PID, motion, remote IO, serial communication, SMS, retain variable, scaling, etc. 

    In hardware, I-8xx7 has 3 or 4 serial ports, support Modbus RTU slave protocol and it can easily communicate with PC/HMI/OPC Server and Touch panel. The I-8xx7 also supports up to 2 COM ports of Modbus RTU / ASCII master protocol to integrate with other Modbus devices. The I-8x37-80 has one 10M Ethernet port.

    The I-8xx7 supports various High/Low profile I/O modules. The user can choose Local I/O modules:I-8K/I-87K I/O modules and RS-485 Remote I/O modules:I-7000 or expansion units (I-87Kn or RU-87Pn) plugged with I-87K serial I/O modules. Compared to I-8437/8837 (It has phased out), I-8x37-80 is 2 ~ 4 times faster!


    MiniOS7 Embedded Operating System (DOS-like)
    Embedded ISaGRAF Ver.3 SoftLogic
    Support IEC 61131-3 Standard
    Accepts max. 64 KB ISaGRAF code size


    80186 CPU (16-bit & 80 MHz) (for I-8x37-80)
    80188 CPU (16-bit & 40 MHz) (for I-8x17)
    512 KB SRAM & 512 KB Flash
    4/8 I/O Expansion Slots (support High/Low Profile I/O Modules)
    10M Ethernet Port (for I-8x37-80)
    3 or 4 Serial Ports (RS-232, RS-485)
    Models I-8417 I-8817 I-8437-80 I-8837-80
    System Software
    OS MiniOS7 (DOS-like embedded operating system)
    Development Software
    ISaGRAF Ver. 3 IEC 61131-3 standard
    Languages LD, ST, FBD, SFC, IL & FC
    Max. Code Size 64 KB
    Scan Time Normal program: 5 ~ 100 ms
    Complex or Large program: 25 ~ 500 ms 
    (or more)
    Normal program: 2 ~ 25 ms
    Complex or Large program: 10 ~ 125 ms 
    (or more)
    CPU Module
    CPU 80188, 40 MHz 80186, 80 MHz
    SRAM 512 KB
    Flash 512 KB
    NVRAM 31 bytes (battery backup, data valid up to 10 years)
    RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
    Watchdog Timers Yes (0.8 second)
    DIP Switch Yes (8 bits)
    Communication Ports
    Ethernet - RJ45 x 1, 10 Base-T
    COM1 RS-232 (TxD, RxD, GND)
    COM2 RS-485 (Data+, Data-) 
    with internal self-tuner ASIC
    COM3 RS-232/RS-485
    (RS-232: TxD, RxD, RTS, CTS, GND ; RS-485: Data+, Data-)
    COM4 RS-232: (Full modem signals)
    (TxD, RxD, RTS, CTS, DSR, DTR, CD, RI, GND)
    LED Display Yes, 5-Digit
    Programmable LED Indicators 3
    Push Buttons 4
    I/O Expansion Slots
    Slot Number 4 8 4 8
    Note: For I-8K and I-87K Modules Only
    Dimensions (W x L x H) 230 mm x 110 mm x 75.5 mm: I-8417, I-8437-80
    354 mm x 110 mm x 75.5 mm: I-8817, I-8837-80
    Operating Temperature -25 ~ +75 °C
    Storage Temperature -30 ~ +85 °C
    Ambient Relative Humidity 5 ~ 95% RH (non-condensing)
    Input Range +10 ~ +30 VDC
    Protection Power reverse polarity protection
    Capacity 20 W
    Consumption 3.9 W 5.1 W 3.9 W 5.1 W
    Protocols (Note that certain protocols require optional devices)
    Modbus RTU/ASCII Master A max. of 2 ports: COM1 or COM3 or COM4 or COM5 (*)
    (To connect to other Modbus Slave devices.)
    Modbus RTU Slave A max. of 2 ports. (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.)
    I-8x17: COM1/2 I-8x37-80: COM1/3
    Modbus TCP/IP Slave - Max. 4 connection. 
    (For connecting ISaGRAF & PC/HMI)
    User-defined Protocol Custom protocols can be applied at COM1, COM3, COM4 & COM5 ~ COM20 (*) by serial communication function blocks.
    Remote I/O One of COM3 or COM4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC.
    Fbus Built-in COM3 Port to exchange data between ICP DAS's ISaGRAF PACs.
    Ebus (for I-8x37-80) - Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port.
    Short Message Service
    One of COM4 or COM5 (*)can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone.
    Optional GSM Modem
    : GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) or other GSM/GPRS Modem.
    Modem Link Supports PC to remotely download & monitor the controller through a normal modem.
    MMICON/LCD One of COM3 or COM4 supports the ICP DAS MMICON. The is featured with a 240x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.
    Redundant Bus7000 Two ISaGRAF PACs can link to remote I-7000 & I-87K I/O modules at the same time. Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os. (FAQ-084)
    Optional I/O Functions  (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list)
    PWM Output
    Pulse Width Modulation 
    8-ch max. for one controller. 500 HZ max. for Off = 1 & On = 1 ms
    Output square wave: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms
    Optional DO boards: I-8037, 8041, 8042, 8054, 8055, 8056, 8057,8060, 8063, 8064, 8065, 8066, 8068, 8069. (Relay Output boards cannot generate fast square wave )
    Parallel DI Counter 8-ch. max. for 1 controller. Counter value: 32-bit. 500 HZ max. Min. pulse width > 1 ms
    Optional DI boards: I-8040, 8042, 8051, 8052, 8053, 8054, 8055, 8058, 8063, 8077
    Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
    Optional serial I-87k DI boards: I-87040, 87051, 87052, 87053, 87054, 87055, 87058, 87063
    Remote DI Counter All remote I-7000 & I-87K DI modules support counters. 100Hz max. value: 0 ~ 65535
    High Speed Counter I-87082: 100 kHz max. 32-bit, 
    I-8080:450 kHz max. 32-bit
    Motion Control Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. 
    Ethernet communication is also available when doing motion control.
    SRAM Expansion
    Battery Backup SRAM With a S256/S512 (plug in the socket of the back-plane), data can also be stored in the S256/S512. PC can load these data via COM1 (or COM2 of I-8417/8817, or Ethernet Port of I-8437-80/8837-80). PC can also download pre-defined data to the S256/S512. 
    Optional: S256: 256 KB, S512: 512 KB
    * Note: The COM5 ~ COM20 ports are located in the expansion boards if they are installed in slots 0 ~ 7 of I-8xx7-80.
    * ISaGRAF FAQ: www.icpdas.com > Support > FAQ > ISaGRAF Soft-Logic PAC
    ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.  
    I-8437-80 CR 4 slots Faster CPU (80 MHz) Ethernet ISaGRAF PAC (RoHS)
    I-8437-80-G CR
    I-8837-80 CR 8 slots Faster CPU (80 MHz) Ethernet ISaGRAF PAC (RoHS)
    I-8837-80-G CR
    I-8417 CR 4 slots ISaGRAF PAC (RoHS)
    I-841-G CR
    I-8817 CR 8 slots ISaGRAF PAC (RoHS)
    I-8817-G CR
    -G : means "Gray" color
    ISaGRAF Development Software
    ISaGRAF-256 ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle
    ISaGRAF-32 ISaGRAF Workbench Software Ver.3 (32 I/O Tags)
    Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available. 
    (ISaGRAF-32 can be used to control more than 32 I/O tags. Please refer to Ch. 3.4 of the ISaGRAF User Manual.)






      s!nus-elektrotechnikai bt.

      Industrial IT & Automation


    24 éves jubileum / 24 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 


    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter


    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.


    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.