Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírlevél
Tanúsítvány
SSL Certificate
Ajándékot keres?

Házhozszállítás

Termék részletek


I-8KE4-MTCP-G # Controller/Intel 80186-80/Modbus TCP/4 hely/512KB, ICP DAS

Rendelésre 10-15 munkanap
Raktárkészlet: NINCS
I-8KE4-MTCP-G # Controller/Intel 80186-80/Modbus TCP/4 hely/512KB, ICP DAS
  • I-8KE4-MTCP-G # Controller/Intel 80186-80/Modbus TCP/4 hely/512KB, ICP DAS
  • I-8KE4-MTCP-G # Modbus/TCP I/O Unit (Ethernet enables Modbus commands to run over TCP/IP)

 

  • Supports IPv4
  • Supports Modbus/TCP communication protocol at Ethernet port.
  • Supports Modbus/RTU communication protocol at RS-232 port.
  • Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
  • I/O configurable via the Ethernet (Using the Modbus Utility)
  • I/O scan engine
  • The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous
  • to have high-data-density registers to get best communication efficiency.
  • Support power on value and safe value for analog/digital output module.
  • Detection of I/O module communication status (online/offline).
  • Allowed a maximum of 8 host PCs access simultaneously
  • We provide the Modbus SDK allowing users customized the Modbus firmware.
  • I-8KE4-MTCP-G # Controller/Intel 80186-80/Modbus TCP/4 hely/512KB, ICP DAS
    I-8KE4-MTCP-G # Modbus/TCP I/O Unit (Ethernet enables Modbus commands to run over TCP/IP)

     

    I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc

    The Modbus Utility package is for Windows 98/SE/2K/XP. It includes
    • Modbus Utility
      1. On-line configuration via Ethernet
      2. TO memorize the I/O setting in EEPROM
      3. Automatically generate register mapping tables
      4. Configuration export/import 
      5. COM Port setting(Modbus/RTU gateway, VxComm, UpLink, Programming, Debug)
      6. show I/O value by 3 modes(Value, Dec, Hex)
      7. Analog output, digital output control
      8. Plot trend line
      9. I/O value datalog (.txt file)
      10. Power on value, safe value, WDT setting
    • MBRTU
      Modbus/RTU client (with source code in VB6) to diagnostic Modbus/RTU slave devices.
    • MBTCP
      Modbus/TCP client (with source code in VB6) to diagnostic Modbus/TCP slave devices.

     
    Models I-8KE4-MTCP I-8KE8-MTCP
    CPU module
    CPU 80186-80 or compatible (16-bit and 80MHz)
    SRAM 512 KBytes
    Flash 512 KBytes
    EEPROM 2 KBytes
    NVRAM
    RTC (real time clock)
    Hardware Serial Number
    Built-in Watchdog Timer Yes
    Communicate Interface
    COM 0 Internal communication with the 87K modules
    COM 1 RS-232 (to update firmware)
    COM 2
    COM 3
    COM 4
    Ethernet Port 10BaseT NE2000 compatible
    SMMI
    5 - Digit LED Display Yes
    3 - Programmable LED Indicators Yes
    4 - Push Buttons Yes
    I/O expansion slots
    Slot Number 4 Slots 8 Slots
    Mechanical
    Dimensions 230 mm x 110 mm x 75.5 mm 354 mm x 110 mm x 75.5 mm
    Environmental
    Operating Temperature -25 °C ~ +75 °C
    Storage Temperature -30 °C ~ +85 °C
    Humidity 5 ~ 95%,non-condensing
    Power
    Protection Power reverse polarity protection
    3 KV power isolation Yes
    Power requirement 10 ~ 30 VDC
    Power supply 20 W
    Power consumption 3.9 W 5.1 W
     
    I-8KE4-MTCP-G 4-slots Ethernet I/O unit (Gray color)
    I-8KE8-MTCP-G 8-slots Ethernet I/O unit (Gray color)
     

     

      s!nus-elektrotechnikai bt.

      Industrial IT & Automation

     

    23 éves jubileum / 23 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 

     

    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter

     

    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.