I-8KE8-MTCP-G # Controller/Intel 80186-80/Modbus TCP/8 hely/512KB, ICP DAS

Name: I-8KE8-MTCP-G # Controller/Intel 80186-80/Modbus TCP/8 hely/512KB, ICP DAS
SKU: I-8KE8-MTCP-G
Price: 79923964 HUF
Availability: InStock

Cikkszám:

I-8KE8-MTCP-G

I-8KE8-MTCP-G # Controller/Intel 80186-80/Modbus TCP/8 hely/512KB, ICP DAS
I-8KE8-MTCP-G # Modbus/TCP I/O Unit (Ethernet enables Modbus commands to run over TCP/IP)

Supports IPv4
Supports Modbus/TCP communication protocol at Ethernet port.
Supports Modbus/RTU communication protocol at RS-232 port.
Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
I/O configurable via the Ethernet (Using the Modbus Utility)
I/O scan engine
The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous
to have high-data-density registers to get best communication efficiency.
Support power on value and safe value for analog/digital output module.
Detection of I/O module communication status (online/offline).
Allowed a maximum of 8 host PCs access simultaneously
We provide the Modbus SDK allowing users customized the Modbus firmware.

nettó: 62 932 255 Ft bruttó: 79 923 964 Ft

Nem vásárolható!

Részletek

I-8KE8-MTCP-G # Controller/Intel 80186-80/Modbus TCP/8 hely/512KB, ICP DAS
I-8KE8-MTCP-G # Modbus/TCP I/O Unit (Ethernet enables Modbus commands to run over TCP/IP)

I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc

The Modbus Utility package is for Windows 98/SE/2K/XP. It includes

Modbus Utility
1. On-line configuration via Ethernet
2. TO memorize the I/O setting in EEPROM
3. Automatically generate register mapping tables
4. Configuration export/import
5. COM Port setting(Modbus/RTU gateway, VxComm, UpLink, Programming, Debug)
6. show I/O value by 3 modes(Value, Dec, Hex)
7. Analog output, digital output control
8. Plot trend line
9. I/O value datalog (.txt file)
10. Power on value, safe value, WDT setting
MBRTU
Modbus/RTU client (with source code in VB6) to diagnostic Modbus/RTU slave devices.
MBTCP
Modbus/TCP client (with source code in VB6) to diagnostic Modbus/TCP slave devices.

Models	I-8KE4-MTCP	I-8KE8-MTCP
CPU module
CPU	80186-80 or compatible (16-bit and 80MHz)
SRAM	512 KBytes
Flash	512 KBytes
EEPROM	2 KBytes
NVRAM	–
RTC (real time clock)	–
Hardware Serial Number	–
Built-in Watchdog Timer	Yes
Communicate Interface
COM 0	Internal communication with the 87K modules
COM 1	RS-232 (to update firmware)
COM 2	–
COM 3	–
COM 4	–
Ethernet Port	10BaseT NE2000 compatible
SMMI
5 - Digit LED Display	Yes
3 - Programmable LED Indicators	Yes
4 - Push Buttons	Yes
I/O expansion slots
Slot Number	4 Slots	8 Slots
Mechanical
Dimensions	230 mm x 110 mm x 75.5 mm	354 mm x 110 mm x 75.5 mm
Environmental
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-30 °C ~ +85 °C
Humidity	5 ~ 95%,non-condensing
Power
Protection	Power reverse polarity protection
3 KV power isolation	Yes
Power requirement	10 ~ 30 VDC
Power supply	20 W
Power consumption	3.9 W	5.1 W

I-8KE4-MTCP-G	4-slots Ethernet I/O unit (Gray color)
I-8KE8-MTCP-G	8-slots Ethernet I/O unit (Gray color)

s!nus-elektrotechnikai bt.

Industrial IT & Automation

25 éves jubileum / 25 th Anniversary

www.s-e.hu # www. icpdas.hu

Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608

RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY

RS-232 - WiFi konverter, RS-485 - WiFi konverter,

ICP CON konverter USR IOT konverter

Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY

RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.

Adatok

Gyártó:

ICP DAS

Weboldal: