- Újdonságok
- Akciós termékek
- Raktáron (szállítás 2-4 nap)
- Outlet
- Konverter, vonalerősítő, hub
- Soros - Ethernet konverter, RS-232, RS-422, RS-485
- Ethernet switch
- PAC - PLC - Érintőképernyős PLC - HMI
- ICP DAS Bővítő kártyák # X-Board, XV-Board, XW-Board
- RS-485 portos terepi I/O [Modbus, DCON]
- I-7000 terepi I/O modulok [DCON protokoll, RS-485 port]
- M-7000 terepi I/O modulok [Modbus RTU és DCON protokoll, RS-485 port]
- tM-sorozatú terepi I/O modulok [DCON, Modbus RTU, Modbus ASCII ]
- M-2000 terepi I/O modulok [Modbus RTU és DCON]
- ICP DAS LC sorozatú I/O modulok (ház és épületautomatizáláshoz)
- Wellpro Modbus I/O
- Ethernet I/O modulok
- USB I/O modulok
- Profibus [konverter, vonalerősítő, átjáró, I/O, csatlakozó, kábel]
- Modbus modulok
- CAN modulok, kártyák
- CANopen modulok, kártyák
- DeviceNet modulok, kártyák
- SAE J1939 modulok
- HART modulok
- EtherNet/IP modulok
- BACnet/IP modulok
- BACnet MS/TP modulok
- PROFINET modulok
- EtherCAT modulok
- M-Bus [Meter-Bus] modulok
- W-MBUS [Wireless-MBUS]
- DALI (Digital Addressable Lighting Interface)
- Data Highway Plus
- PLC programozó kábel és szerszámgép kábel a legtöbb ismert márkához
- Jelkondícionáló modul
- Ipari Panel PC
- Ipari számítógép
- Ipari notebook és tablet
- Ipari és kereskedelmi monitor
- HMI kijelzők
- WiFi eszközök
- Fogyasztásmérés, PMMS, mérőleolvasás, teljesítménymérő gyűjtés
- GSM, GPRS, SMS, GPS, M2M
- ZigBee termékek
- Rádió modem [RF modem, LoRa modem]
- Modbus rádió modemek, RF, 868 MHz
- LoRaWAN eszközök
- SIGFOX eszközök
- Bluetooth
- Infra port, IrDa
- Industrial Internet of Things (IIoT) [MQTT protokoll]
- Ethernet média konverter, extender
- Touch Pad
- Optikai leválasztó, szigetelő, villám és túlfeszültség védelem
- Motion és gépadat gyűjtés
- Hőmérséklet, páratartalom, megvilágítás adatgyűjtő
- PC és külső bővítő kártyák - adatgyűjtés, I/O és interfész (PCI, UPCI, ISA, PCI Express, stb.)
- Épület és Home automatizálás
- KNX termékek
- Kiegészítők (kábel, csatlakozó, stb.)
- Tápegységek
- Automatizálás, vezérlés, szabályozás eszközei
- Machine Vision ipari kamerák és tartozékok
- Kifutott termékek

M-7016 # I/O Module/Modbus RTU/DCON/2AI/Strain Gauge/4DO/1DI, ICP DAS
- I-7016/I-7016D/M-7016/M-7016D
- 2 nyúlásmérő bemenet
- Nagy felbontás: 16-bit
- Gerjesztő feszültség kimenet: 0 ~ +10 V
- 50 Hz esemény számláló (Digital Input)
- High/Low Alarm (Digital Output)
- Linear Mapping Function
- 3000 VDC belső modul szigetelés
- Dual Watchdog
- Széles működési hőmérséklet tartomány: -25 ~ +75°C
- Modbus RTU és DCON protokoll (M-7000)
- DCON protokoll (I-7000)
-
I-7016 CR 2-channel Strain Gauge Input Module using the DCON Protocol (Blue Cover) (RoHS) I-7016D CR I-7016 with 7-segment LED Display (Blue Cover) (RoHS) I-7016D-G CR I-7016 with 7-segment LED Display (Gray Cover) (RoHS) M-7016-G CR 2-channel Strain Gauge Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7016D-G CR M-7016 with 7-segment LED Display (Gray Cover) (RoHS) In the industrial environment, there are numerous examples where force needs to be converted into a measurable electrical output. In most cases, a strain gauge or a load cell can be used. But the question is, how do we then deal with these electrical output measurements? In this situation, the I-7016 is definitely the No. 1 choice. Not only can the module process data from a load cell or a strain gauge, it also features linear mapping that can be used to directly convert the resulting data into weight via a user-defined correspondent table. The I-7016 supports full-bridge strain gauges and provides 2 Analog Input channels, 1 excitation voltage output channel, 1 Digital Input channels and 4 Digital Output channels. The module provides a programmable input range (±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, and ±2.5 V) and each Analog Input channel can be individually configured. Excitation voltage output can be in the range of 0 ~ +10 V, with a 40 mA driving efficiency. Digital Output channels can also be set as high or low alarm outputs. The M-7016 supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7016.- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Models I-7016 I-7016D M-7016 M-7016D Strain Gauge Input Channels 2 Wiring 4-wire Sensor Types Full-Bridge Resolution 16-bit Accuracy ±0.05% of FSR Sampling Rate 2/10 Hz Input Impedance 20 MΩ Individual Channel Configuration - Overvoltage Protection ±5 VDC Open Wire Detection - Long Distance Measurement - Excitation Voltage Output Channels 1 Range 0 ~ +10 V Max. Load Current 40 mA Resolution 16-bit Accuracy ±0.05% Power-on Value Yes Digital Input Channels 1 Contact Dry Sink/Source (NPN/PNP) Source ON Voltage Level Close to GND OFF Voltage Level Open Counter (50 Hz, 16-bit) Yes Input Impedance 3 kΩ Overvoltage Protection ±30 VDC Digital Output Channels 4 Type Open Collector Sink/Source (NPN/PNP) Sink Load Voltage +3.5 ~ +50 VDC Max. Load Current 30 mA/Channel Power-on Value Yes Safe Value Yes Models I-7016 I-7016D M-7016 M-7016D Communication Interface RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) Format (N, 8, 1) (N, 8, 2)
(E, 8, 1) (O, 8, 1)N, 8, 1 Baud Rate 1200 to 115200 bps Protocol DCON Modbus RTU, DCON Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable) LED Indicator/Display System LED Indicator Yes, 1 as Power/Communication Indicator I/O LED Indicator - 7-Segment LED Display - Yes - Yes Isolation Intra-Module Isolation, Field-to-Logic 1500 VDC EMS Protection ESD (IEC 61000-4-2) - EFT (IEC 61000-4-4) - Surge (IEC 61000-4-5) - Power Reverse Polarity Protection Yes Input Range +10 ~ +30 VDC Consumption 2.4 W 3.0 W 2.4 W 3.0 W Mechanical Dimensions (L x W x H) 123 mm x 72 mm x 35 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 to +75°C Storage Temperature -40 to +85°C Humidity 10 to 95% RH, Non-condensing I-7016 CR 2-channel Strain Gauge Input Module using the DCON Protocol (Blue Cover) (RoHS) I-7016D CR I-7016 with 7-segment LED Display (Blue Cover) (RoHS) I-7016D-G CR I-7016 with 7-segment LED Display (Gray Cover) (RoHS) M-7016-G CR 2-channel Strain Gauge Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7016D-G CR M-7016 with 7-segment LED Display (Gray Cover) (RoHS) s!nus-elektrotechnikai bt.
Industrial IT & Automation
23 éves jubileum / 23 th Anniversary
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2020 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
-
Gyártó ICP DASRaktárkészlet NINCSCikkszám M-7016_CRStátusz Rendelésre 4-10 munkanap