Új jelszó kérése
Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírlevél
TOP termékek
Termékajánló
Tanúsítvány
SSL Certificate
Házhozszállítás

Termék részletek


M-7019R-G # I/O Module/Modbus RTU/8AI/High Prot., ICP DAS

Rendelésre 1-2 hét
Raktárkészlet: NINCS
M-7019R-G #  I/O Module/Modbus RTU/8AI/High Prot., ICP DAS
87 082 Ft 110 594 Ft
  • M-7019
  • 8 univerzális analóg bemenet
  • 240 Vrms túlfeszültség védelem
  • Egyéni csatorna konfiguráció
  • Jumperrel állítható feszültség, áram vagy hőelem bemenet 
  • Nyitott hőelem felismerés
  • 4 kV ESD védelem
  • 3000 VDC belső modul szigetelés
  • Dual Watchdog
  • Széles működési hőmérséklet tartomány: -25 ~ +75°C
  • Modbus RTU és DCON protokoll
  • RS-485 port
  • I-7019R CR 8-channel Universal Analog Input Module using the DCON Protocol (Blue Cover) (RoHS)
    I-7019R-G CR 8-channel Universal Analog Input Module using the DCON Protocol (Gray Cover) (RoHS)
    M-7019R-G CR 8-channel Universal Analog Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
     
    The I-7019R is an Analog Input module that includes 8 differential Analog Input channels. Voltage, current or thermocouple input can be selected for all Analog Input channels via a jumper and each channel can be configured for an individual range. The voltage input range can be from ±15 mV to 10 V, the current input range can be either +4 to +20 mA, 0 to +20 mA, or ±20 mA, and types J, K, T, E, R, S, B, N, C, L, M,LDIN43710 can be used for the thermocouple input. Up to 8 different Analog Input types can be connected to a single module. Overvoltage protection of up to 240 Vrms is provided. The module also features per-channel open wire detection for the thermocouple and +4 to +20 mA input types, and provides 4 kV ESD protection as well as 3000 VDC intra-module isolation. The M-7019R supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7019R.
    Képtalálat a következőre: „i-7019r” 
    Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment.
     
    Models I-7019R M-7019R
    Analog Input
    Channels 8
    Wiring Differential
    Sensor Types Thermocouple J, K, T, E, R, S, B, N, C, L, M, LDIN43710
    Voltage ±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
    Current ±20 mA, 0 ~ +20 mA, +4 ~ +20 mA (Jumper selectable)
    Resolution 16-bit
    Accuracy ±0.1% of FSR
    Sampling Rate 8 Hz (Total)
    Input Impedance Voltage 2 MΩ
    Current 125 Ω
    Thermocouple > 400 kΩ
    Common Voltage Protection ±200 VDC
    Individual Channel Configuration Yes
    Overvoltage Protection 240 Vrms
    Open Wire Detection (for thermocouple only) Yes
    Temperature Outputs onsistency -
    Stable Temperature Output in the Field -
    Note: For highly-accurate thermocouple measurement, ICP DAS recommends selecting the I-7018Z/I-7019Z module,which features automatic cold-junction compensation for each channel, ensuring consistent and stable temperature output.
     
    Models I-7019R M-7019R
    Communication
    Interface RS-485
    Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
    Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
    Baud Rate 1200 to 115200 bps
    Protocol DCON Modbus RTU, DCON
    Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
    LED Indicator/Display
    System LED Indicator Yes, 1 as Power/Communication Indicator
    I/O LED Indicator -
    7-Segment LED Display -
    Isolation
    Intra-Module Isolation, Field-to-Logic 3000 VDC
    EMS Protection
    ESD (IEC 61000-4-2) ±4 kV
    EFT (IEC 61000-4-4) ±4 kV
    Power
    Reverse Polarity Protection Yes
    Input Range +10 ~ +30 VDC
    Consumption 1.2 W
    Mechanical
    Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
    Installation DIN-Rail or Wall Mounting
    Environment
    Operating Temperature -25 to +75°C
    Storage Temperature -40 to +85°C
    Humidity 10 to 95% RH, Non-condensing
     
    I-7019R CR 8-channel Universal Analog Input Module using the DCON Protocol (Blue Cover) (RoHS)
    I-7019R-G CR 8-channel Universal Analog Input Module using the DCON Protocol (Gray Cover) (RoHS)
    M-7019R-G CR 8-channel Universal Analog Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
     

    Sinus-Elektrotechnikai Bt.

    ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Barebone PC, Mini ITX PC, RS-485 I/O, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus csatlakozó, Profibus kábel, ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018 Sinus-Elektrotechnikai Bt. Minden jog fenntartva

Webáruház készítés