M-7055D-NPN # I/O Module/Modbus RTU/DCON/8DI/8DO/NPN/LED, ICP DAS, ICP CON

The I-7055 offers 8 isolated channels for digital input and 8 isolated channels for digital output. Either sink-type or source-type digital input can be selected via wire connections. All digital input channels are also able to be used as 16-bit counters. The I-7055 supports source-type output with short circuit protection. There are options to enable both power-on and safe values. The I-7055D has 16 LED indicators that can be used to monitor the status of the digital input and digital output channels. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The M-7055 has the same hardware specifications as the I-7055, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.

Building Automation Factory Automation Machine Automation Remote Maintenance Remote Diagnosis Testing Equipment

Models I-7055 I-7055D I-7055-NPN I-7055D-NPN M-7055 M-7055D M-7055-NPN M-7055D-NPN Digital Input/Counter Channels 8 Type Dry Contact Source Wet Contact Sink/Source Wet Contact On Voltage Level +10 ~ 50 VDC Off Voltage Level +4 VDC Max. Dry Contact On Voltage Level Close to GND Off Voltage Level Open Effective Distance for Dry Contact 500 m Max. Counters Max. Count 65535 (16-bit) Max. Input Frequency 100 Hz Min. Pulse Width 5 ms Input Impedance 10 KΩ Channel-to-Channel Isolation - Overvoltage Protection ±70 VDC Digital Output Channels 8 Type Open Source Open Collector Sink/Source (NPN/PNP) Source Sink Load Voltage +10 ~ 40 VDC +3.5 ~ 50 VDC Max. Load Current 650 mA/Channel 700 mA/Channel Overvoltage Protection 47 VDC 60 VDC Overload Protection 1.4 A (with short-circuit protection) Power-on Value Yes Safe Value Yes

Models I-7055 I-7055D I-7055-NPN I-7055D-NPN M-7055 M-7055D M-7055-NPN M-7055D-NPN Communication Interface RS-485 RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) Format N, 8, 1 Baud Rate 1200 ~ 115200 bps Protocol DCON (for I-7055 series) Modbus RTU, DCON (for M-7055 series) Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable) LED Indicator/Display System LED Indicator Yes, 1 LED as Power/Communication Indicator I/O LED Indicator - Yes, 8 LEDs as Digital Input & 8 LED as Digital Output Indicators - Yes, 8 LEDs as Digital Input & 8 LED as Digital Output Indicators 7-Segment LED Display - Isolation Intra-Module Isolation, Field-to-Logic 3750 VDC EMS Protection ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal ±8 kV Air for Random Point EFT (IEC 61000-4-4) ±4 kV for Power Line Surge (IEC 61000-4-5) ±3 kV for Power Line Power Reverse Polarity Protection Yes Input Range 10 ~ 30 VDC Consumption 0.8 W 1.6 W 1.2 W 2.2 W Mechanical Dimensions (W x L x H) 72 mm x 123 mm x 35 mm Installation DIN-Rail or Wall Mounting Environment Operating Temperature -25 ~ +75°C Storage Temperature -40 ~ +85°C Humidity 10 ~ 95% RH, Non-condensing

I-7055 CR 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module using the DCON Protocol (Blue Cover) (RoHS) I-7055-G CR 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module using the DCON Protocol (Gray Cover) (RoHS) I-7055D CR I-7055 with LED Display (Blue Cover) (RoHS I-7055D-G CR I-7055 with LED Display (Gray Cover) (RoHS) I-7055-NPN-G CR 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module (Gray Cover) (RoHS) I-7055D-NPN-G CR I-7055-NPN with LED Display (Gray Cover) (RoHS) M-7055-G CR 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7055D-G CR M-7055 with LED Display (Gray Cover) (RoHS) M-7055-NPN-G CR 8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) M-7055D-NPN-G CR M-7055-NPN with LED Display (Gray Cover) (RoHS)

RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

RS-232 - WiFi konverter, RS-485 - WiFi konverter,

ICP CON konverter    USR IOT konverter

Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

© 2018-2022  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.