The PDS-220Fx series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway”, that are designed for adding optical fiber connectivity to RS-232/422/485 devices.
The fiber-optic communications permits transmission over longer distances than other forms of communications because of the signals travel along them with less loss and no crosstalk. It has following important features: Immunity to electromagnetic interference (EMI) — Motors, relays, welders and other industrial equipment generate a tremendous amount of electrical noise that can cause major problems with copper cabling.
- High electrical resistance, making it safe to use near high-voltage equipment or between areas with different earth potentials.
- No sparks — important in flammable or explosive gas environments.
- Not electromagnetically radiating, and difficult to tap without disrupting the signal — important in high-security environments.
- Because of these reasons, optical fibers have largely replaced copper wire communications in core networks in the developed world.
The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-220Fx series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-220Fx series is able to meet the demands of every network-enabled application.
The PDS-220Fx series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-220Fx up in just one second and gives you fastest responses.
The PDS-220Fx is equipped with 1 RS-232 port and 1 RS-485/422 port. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.
| Models |
PDS-220FT |
PDS-220FC |
PDS-220FCS |
PDS-220FCS-60 |
| System |
| CPU |
80186-80 MHz or compatible |
| SRAM |
512 KB |
| Flash Memory |
Flash ROM: 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles |
| Built-in Watchdog Timer |
Yes |
| LED Indicators |
Sys, Link/Act |
| NIT Pin |
Yes |
| Interface |
| Fiber Port |
100 Base-FX (ST connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
100 Base-FX (SC connector) |
| Mode |
Multi mode fiber cables: 50/125, 62.5/125 or
100/140 μm
Wavelength : 1300 or 1310nm
Min. TX Output:- 20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm
Min. TX Output: - 15 dBm,
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm,
Min. RX Overload: -5 dBm
Budget: 19 dBm |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm
Wavelength: 1300 or 1310nm
Min. TX Output: - 5 dBm,
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm,
Min. RX Overload: -5 dBm
Budget: 30 dBm |
| Distance |
2 km, (62.5/125 μm recommended) for full duplex |
30 Km, (9/125 μm recommended) for full duplex |
60 Km, (9/125 μm recommended) for full duplex |
| Serial Port |
| COM1 |
Male DB-9, 5-wire RS-232 (RxD, TxD, CTS, RTS, GND)
Note: +/- 4 kV ESD Protection |
| COM2 |
Removable Terminal Block,
2-wire RS-485 (D+, D-, GND) with Self-tuner ASIC
or 4-wire RS-422 (TxD+, TxD-, RxD+, RxD-, GND)
Note: +/- 4 kV ESD Protection |
| RS-485 |
Bias Resistor |
Yes, 1 KΩ |
| Node |
254 (max.) |
| COM Port Format |
| Data Bit |
7, 8 |
| Parity |
None, Even, Odd, Mark, Space |
| Stop Bit |
1.2 |
| UART |
16c550 or compatible |
| Baud Rate |
115200 bps Max. |
| LED Indicators |
| Link/Act |
Green |
| System |
Red |
| Power |
| Protection |
Power reverse polarity protection |
| Input Range |
+12 ~ +48 VDC (non-regulated) |
| Power Consumption |
0.14 A @ 24 VDC |
| Frame GND |
Yes (for EMS Protection) |
| Mechanism |
| Flammability |
Fire Retardant Materials (UL94-V0 Level) |
| Dimension (W x H x D) |
31 mm x 121 mm x 157 mm |
31 mm x 123 mm x 157 mm |
| Installation |
DIN-Rail mounting |
| Casing |
Fire Retardant Plastic |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +85 °C |
| Humidity |
10 ~ 90% RH, non-condensing |
| Fiber Port Connector |
ST |
SC |
| Model |
CPU |
SRAM |
Flash |
Baud Rate |
Fiber Port |
Mode |
Distance |
COM1 |
COM2 |
| PDS-220FT |
80 MHz |
512 KB |
512 KB |
115200 bps Max. |
100 Base-FX,
ST connector |
Multi-Mode |
2 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FC |
100 Base-FX,
SC connector |
Multi-Mode |
2 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FCS |
100 Base-FX,
SC connector |
Single-Mode |
30 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
| PDS-220FCS-60 |
100 Base-FX,
SC connector |
Single-Mode |
60 km |
5-wire RS-232 |
2-wire RS-485
4-wire RS-422 |
Bővített forgalmazói/gyártói információk (EU 2023/988 rendelet)
Kereskedelmi név: SINUS-ELEKTROTECHNIKAI BT.
Postai cím: 9028 Győr, Móra tér 17.
Elektronikus cím: https://www.s-e.hu/
|
s!nus-elektrotechnikai bt.
Industrial IT & Automation
|
|
Ipari IT és Automatizálás 1997 óta
www.s-e.hu # www. icpdas.hu
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
|
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2025 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
