Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírlevél
Tanúsítvány
SSL Certificate
Ajándékot keres?

Házhozszállítás

Termék részletek


PISO-DNM100U-T # PCI kártya/Universal/CAN/Master/DeviceNet/sorkapocs/szigetelt, ICP DAS

Rendelésre 4-10 munkanap
Raktárkészlet: NINCS
PISO-DNM100U-T # PCI kártya/Universal/CAN/Master/DeviceNet/sorkapocs/szigetelt, ICP DAS
139 641 Ft 177 344 Ft
  • PISO-DNM100U-T # PCI kártya/Universal/CAN/Master/DeviceNet/sorkapocs/szigetelt, ICP DAS
  • PISO-DNM100U-T # DeviceNet firmware built-in and One standalone intelligence CAN communication port with 5-pin screw terminal connector for universal PCI bus system

 

  • DeviceNet Version: Volume I & II, Release 2.0
  • Programmable master MAC ID and baud rate
  • Baud Rate: 125 kbps, 250 kbps, 500 kbps
  • Support Group 2 and UCMM connection
  • I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic
  • I/O Length: max 512 input bytes and 512 output bytes pre slave
  • Slave Node : 63 nodes max
  • Support auto-search slave device function
  • Support on-line adding and removing devices
  • Support auto-detect Group 2 and UCMM device
  • Auto-reconnect when the connection is broken
  • LED: Status,ERR
  • PISO-DNM100U-T # PCI kártya/Universal/CAN/Master/DeviceNet/sorkapocs/szigetelt, ICP DAS
    PISO-DNM100U-T # DeviceNet firmware built-in and One standalone intelligence CAN communication port with 5-pin screw terminal connector for universal PCI bus system

     

    PISO-DNM100 can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". PISO-DNM100 supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications.

    Besides, PISO-DNM100 uses the new CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example Win98/Win2000/WinXP. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, PISO-DNM100 is developed for this purpose.

     

    • Programmable Master MAC ID
    • Programmable transfer-rate 125 kbps, 250 kbps, 500 kbps
    • Each port support maximum nodes up to 64
    • Support Group 2 Only Server functions
    • Support UCMM functions
    • Predefined Master-Slave Connection Set
    • The maximum Fragment number is (Input/Output) up to 64
    • Support I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
    • Support Auto-Scan slave device function
    • Support on-line adding and removing devices
    • Support boot-up auto communicating with slave devices
    • Support Auto-Reconnect when the connection is broken

    We have communicated with the following DeviceNet slaves

    1. Allen-Bradley PowerFlex series DeviceNet Inverters
    2. BECKHOFF CX1500-B520 series DeviceNet I/O modules
    3. BECKHOFF BK5250 series DeviceNet I/O modules
    4. MKS 683 series DeviceNet exhaust throttles
    5. MKS MFC (Mass Flow Controller) series DeviceNet devices
    6. MKS DELTA II FRC (Flow Ratio Controller) series DeviceNet devices
    7. MKS DC Power Generator (OPT- xxx) series DeviceNet devices
    8. OMRON DRT1-ID/ODxx series DeviceNet I/O modules
    9. OMRON DRT2-MDxx series DeviceNet I/O modules
    10. COSMOS PS-7 series DeviceNet gas detectors
    11. CELERITY UNIT IFC-125 series DeviceNet devices
    12. Allen-Bradley PowerFlex AC Drives
    13. Allen-Bradley PowerFlex AC Drives with DriveLogix
    14. Allen-Bradley PowerFlex DC Drives
    15. OMRON DRT2-ID08(-1)/MD16
    16. OMRON DRT2-OD08/MD16-1
    17. OMRON DRT2-OD08-1
    18. OMRON DRT2-ID16(-1)/OD16(-1)
    19. OMRON GRT1-DRT
    20. OMRON C200HW-DRT21
    21. Swagelok MS-VCM-D-6-0, MS-VCM-D-6-2 Digital DeviceNet Valve
    22. Swagelok SS-PTX-D-G500-S4-K Digital DeviceNet Pressure-Temperature Transducer
    23. Swagelok SS-PTX-D-G500-SM-K Digital DeviceNet Pressure-Temperature Transducer
    24. Weidmueller SAI-AU M12 DN 16DI/8DO
    25. Weidmueller SAI-AU M12 DN GW 16DI
    26. Weidmueller SAI-AU M12 DN AI/AO/DI
    27. ADVANCED ENERGY Apex RF generators and power-delivery
    28. SMC ITV series Electro-Pneumatic Regulator
    29. SMC Directional Control Valves
    30. SICK DME500 series Distance Sensor
    31. MTS Temposonics R-Series Position Sensors
    32. PFEIFFER VACUUM HiPace series turbopumps

     


     
     
     Memory map of Remote I/O  

    There exist two memory areas, “Input Area” and “Output Area”. The input data of all DeviceNet slaves would be stored in the “Input Area” by DeviceNet master scan engine. Oppositely, the output data of those DeviceNet slaves would be in the “Output Area”. Please refer to the following figure.

    Users can read a bulk data from “Input Area” in the DeviceNet Master module, like PISO-DNM100U or I-8124W. This bulk data contains multiple devices’ input statuses. If one of the input status of the remote DeviceNet slave changes, the corresponding data located in the “Input Area” would change immediately. Oppositely, the “Output Area” contains multiple devices’ output data. Users may change the output value of a certain device by changing the corresponding data located in the “Output Area”.

    Toolkit:

    • Development Toolkit for Windows NT4.0
    • Development Toolkit for Windows 98/ME
    • Development Toolkit for Windows 2000/XP/Vista
    • Development Toolkit for Windows 7 32-bit

    Software:

    Diagnosis

    This utility supports to search all devices and specific devices in the network. These functions help the users to configure the connection of the slave devices. Anymore, the software also can diagnose the remote slave devices when building the DeviceNet network.

    Configuration

    This software supports the users to configure the I/O connection of the devices by searching devices or manual setting. After configuring the I/O connection, the information would be saved into the EEPROM. The users can export the data from the EEPROM easily. Correspondingly, the users can import the data into the EEPROM.

    Remote I/O access
    The software utility can easily to access the I/O data of all the slave devices. The users can monitor the input data of the specific slave device and change the output data to the remote slave device with this utility.
    Kártyatípusok összehasonlítása:
    Product Name
    PISO-DNM100
    PISO-CAN-200/400
    with DeviceNet Library
    Protocol decoder
    186 CPU
    PC CPU
    Time stamp
    186 Timer (0.1 ms)
    PC Timer (about 1 ms)
    CPU Loading
    Light
    Heavy
    Performance
    High
    Normal
    Application
    Various and complex DeviceNet application
    General purpose DeviceNet application

    Hardware/Firmware Feature

    Items
    DeviceNet Product
    PISO-DNM100
    PISO-CAN-200/400
    with DeviceNet Library
    On-board CPU
    Intel 80186, 80Mhz
    None
    DeviceNet Protocol Core
    In Firmware
    In PC driver
    Access node’s I/O
    Firmware
    PC driver
    Reconnect when breaking
    Support
    By User Programming
    Group 2 / Group 3 Checking
    Support
    By User Programming
    Search Slave Devices
    Support
    By User Programming
    Save Slave information
    EEPROM
    By User Programming

    Performance Test

    Node No.
    Items
    DeviceNet Product
    PISO-DNM100
    PISO-CAN-200/400
    1 Nodes
    PC CPU loading
    1 %
    9 %
    2 Nodes
    PC CPU loading
    0 %
    27 %
    4 Nodes
    PC CPU loading
    0 %
    68 %
    8 Nodes
    PC CPU loading
    0 %
    100 %

    Test Environment:
     
    Windows:Microsoft Windows XP Professional Version 2002 Service Pack 2
    CPU:AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ 2.00GHz
    RAM:512 MB
     
    Node Information
     
     
     
     LabView  

    In order to develop complex DeviceNet applications, we provide a LabVIEW driver for this purpose. The PISO-DNM100(U) LabVIEW driver is the function reference to the DeviceNet master. We provide many useful VI functions in the LabVIEW environment. We also have the "DeviceNet Master Utility" to configure the DeviceNet hardware in your PC. The users not only operate easily and develop application rapidly, but also reduce the complexity of applications. The users can communicate with the remote DeviceNet devices in a few simple steps and need not to know about the detail of the DeviceNet protocol. It is the best tool to develop various distributed systems and other industrial applications software on DeviceNet network.

     
     
     
       
    Model Name
    PISO-DNM100-D
    PISO-DNM100-T
    PISO-DNM100U-D
    PISO-DNM100U-T
    Bus Interface
    Type
    PCI bus, 5 V, 33 MHz, 32-bit, plug and play
    Universal PCI supports both 5 V and 3.3 V PCI bus
    Board No.
    By DIP switch
    CAN Interface
    Controller
    NXP SJA1000T with 16 MHz clock
    Microprocessor inside with 80186 80MHz
    Transceiver
    NXP 82C250
    Channel number
    1
    Connector
    9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, N/A for others)
    5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
    9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, N/A for others)
    5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
    Baud Rate (bps)
    125 k, 250 k, 500 k
    Transmission Distance (m)
    Depend on baud rate (for example, max. 1000 m at 50 kbps )
    Isolation
    3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
    Terminator Resistor
    Jumper for 120 Ω terminator resistor
    Specification
    ISO-11898-2, CAN 2.0A and CAN 2.0B
    Protocol
    DeviceNet Volumn I ver2.0, Volumn II ver2.0
    LED
    Round LED
    Green LED, Red LED
    Software
    Driver
    Windows 2K/XP/7/8 (32-bit/64-bit OS)
    Library
    VB 6.0, VC++ 6.0, BCB 6.0, Visual Studio .NET
    Power
    Power Consumption
    300 mA @ 5 V
    Mechanism
    Dimensions
    138mm x 22mm x 92mm (W x L x H)
    138mm x 22mm x 105mm (W x L x H)
    Environment
    Operating Temp.
    0 ~ 60 ℃
    Storage Temp.
    -20 ~ 70 ℃
    Humidity
    5 ~ 85% RH, non-condensing
     
     
     
       
    PISO-DNM100-D
    DeviceNet firmware built-in and one standalone intelligence CAN communication port with D-Sub 9-pin connector for PCI bus system
    PISO-DNM100-T
    DeviceNet firmware built-in and One standalone intelligence CAN communication port with 5-pin screw terminal connector for PCI bus system
    PISO-DNM100U-D
    DeviceNet firmware built-in and one standalone intelligence CAN communication port with D-Sub 9-pin connector for universal PCI bus system
    PISO-DNM100U-T
    DeviceNet firmware built-in and One standalone intelligence CAN communication port with 5-pin screw terminal connector for universal PCI bus system
     

     

      s!nus-elektrotechnikai bt.

      Industrial IT & Automation

     

    23 éves jubileum / 23 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 

     

    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter

     

    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.