SSL Certificate
Ajándékot keres?


Termék részletek

WISE-7126 # POE Controller/Modbus TCP/PoE Ethernet/6x AI/2x AO/2x DI/2x DO, ICP DAS

Rendelésre 4-10 munkanap
Raktárkészlet: NINCS
WISE-7126 # POE Controller/Modbus TCP/PoE Ethernet/6x AI/2x AO/2x DI/2x DO, ICP DAS
99 374 Ft 126 205 Ft
  • WISE-7126 # POE Controller/Modbus TCP/PoE Ethernet/6x AI/2x AO/2x DI/2x DO, ICP DAS
  • WISE-7126 # 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module
  • Built-in Web Server for IF-THEN-ELSE rule setting
  • Built-in IF-THEN-ELSE rule enigne for logic operation
  • No more programming. Just click and get done!
  • Support IO, Counter, Timer, Email operations
  • Modbus/TCP Protocol for SCADA Software Seamless Integration
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
  • 10/100 Base-TX Ethernet
  • AI: 6 (mV, V, mA)
  • AO: 2 (V, mA)
  • DO: 2 (Open Collector Output)
  • DI: 2 (Dry+Wet)
  • WISE-7126 # POE Controller/Modbus TCP/PoE Ethernet/6x AI/2x AO/2x DI/2x DO, ICP DAS
    WISE-7126 # 6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module


    WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

    WISE-7126 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7126 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

    This multi-function module WISE-7126 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 6-channel analog inputs, 2-channel analog outputs, 2-channel digital inputs and 2-channel digital outputs. Each analog input channel provides 240 Vrms high over voltage protection.


    Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
    36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators
    3 THEN actions and 3 ELSE actions
    48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
    12 Timers Delay / Timing functions.
    12 Emails Send Email messages to pre-set Email receivers.
    12 CGI Commands Send pre-set CGI commands.
    12 Recipes Set up THEN/ELSE action groups.
    8 P2P remote modules Set up the connection information for the remote WISE modules.
    Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
    IF Conditions
    DI Channel ON、OFF、ON to OFF、OFF to ON、Change
    AI Channel =、>、<、>=、<=(value)
    Internal Register
    DI Counter =、>、<、>=、<=(value)、Change
    DO Counter
    Timer Timeout、Not Timeout
    P2P DI、AI、DI counter、DO counter、IR
    Rule Status Enable、Disable
    THEN / ELSE Actions
    DO Channel ON、OFF、Pulse Output
    AO Channel Change the value
    Internal Register
    DI Counter Reset
    DO Counter
    Timer Start、Stop
    Email Send
    CGI Commands
    Recipe Execute
    P2P DO(On/Off)、AO、IR
    Rule Status Enable、Disable


    Analog Input
    Input Channels 6 (Differential)
    Input Type
    (Jumper Selectable)
    +/-500 mV, +/-1V, +/-5 V, +/-10 V
    +0 mA ~ +20 mA, +/-20 mA, 4 ~ 20 mA
    Resolution 16-bit
    Sampling Rate 10 Samples/Sec.
    Accuracy +/-0.1%
    Zero Drift +/-20 uV/°C
    Span Drift +/-25 ppm/°C
    Overvoltage Protection 240 Vrms
    Input Impedance 2M Ω
    Common Mode Rejection 86 dB Min.
    Normal Mode Rejection 100 dB
    Individual Channel Configuration Yes
    Analog Output
    Output Channels 2
    Output Type
    (jumper selectable)
    +0 V~ +5 V, +/-5 V, +0 V~ +10 V,+/-10 V
    +0 mA ~ +20 mA, +4 mA ~ +20 mA
    Individual Channel Configuration Yes
    Resolution 12-bit
    Accuracy +/-0.1% of FSR
    Voltage Output Capability 10 V@20 mA
    Current Load Resistance 500 Ω
    Open Wire Detection Yes, for 4 ~ 20mA only
    Digital Input
    Input Channels 2
    Dry Contact
    On Voltage Level Close to GND
    Off Voltage Level Open
    Effective Distance for Dry Contact 500M Max.
    Wet contact On Voltage Level +1 VDC Max.
    Off Voltage Level +3.5 VDC ~ +30 VDC
    Counters Channels 2
    Max. Counts 16-bit (65535)
    Max. Input Frequency 50 Hz
    Min. Pulse Width 10 ms
    Overvoltage Protection 30 VDC
    Digital Output
    Output Channels 2
    Output Type Isolated Open Collector (Sink)
    Max Load Current 700 mA/Channel
    Load Voltage +5 VDC ~ +50 VDC
    Overvoltage Protection 60 VDC
    Overload Protection 1.4 A
    Short-circuit Protection Yes
    CPU 16-bit CPU
    SRAM 512 KB
    Flash Memory 512 KB
    EEPROM 16 KB
    Watchdog Yes
    PoE Ethernet Port 10 / 100 Base-TX and automatic MDI/MDI-X
    2 Way Isolation
    I/O 2500 VDC
    EMS Protection
    ESD (IEC 61000-4-2) ±4 kV Contact for each terminal and ±8 kV Air for random point
    EFT (IEC 61000-4-4) ±4 kV for Power Line 
    LED Display
    PoE PoE On
    L1 System Running
    L2 Ethernet Link/Act
    L3 Ethernet 10/100M Speed
    Power Requirements
    Reserve Polarity Protection Yes
    Powered from terminal block Yes, 12 ~ 48 VDC
    Powered from PoE Yes, IEEE 802.3af, Class1
    Consumption 4.2 W
    Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
    Installation DIN-Rail or Wall mounting
    Operating Temperature -25 ~ +75 °C
    Storage Temperature -30 ~ +80 °C
    Relative Humidity 10 ~ 90% RH, non-condensing


    WISE-7126 CR
    6-channel Analog Inputs, 2-channel Analog Outputs, 2-channel Digital Inputs and 2-channel Digital Outputs PoE Module (RoHS)


      s!nus-elektrotechnikai bt.

      Industrial IT & Automation


    24 éves jubileum / 24 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 


    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter


    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.


    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.