SSL Certificate
Ajándékot keres?


Termék részletek

iP-8447 # Controller/MiniOS7/ISaGRAF/4 hely/512KB/2x Ethernet, ICP DAS

Rendelésre 10-15 munkanap
Raktárkészlet: NINCS
iP-8447 # Controller/MiniOS7/ISaGRAF/4 hely/512KB/2x Ethernet, ICP DAS
  • iP-8447 # Controller/MiniOS7/ISaGRAF/4 hely/512KB/2x Ethernet, ICP DAS
212 898 Ft 270 381 Ft
  • iP-8447 CR # Controller/MiniOS7/ISaGRAF/4 hely/512KB/2x Ethernet, ICP DAS
  • iP-8447 CR # 4 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)
  • 80186, 80 MHz CPU
  • MiniOS7 Inside
  • Development Software: ISaGRAF Ver.3
  • 512 KB Battery Backup SRAM to Retain Data
  • 64-bit Hardware Serial Number
  • 4/8 Hot-Swap Slots for I-87K High Profile I/O Modules
  • Dual 10/100M Ethernet Ports (for iP-8447/8847)
  • 4 Serial Ports (RS-232/485)
  • Redundant Power Inputs
  • Operating Temperature: -25 ~ +75 °C
  • iP-8447 CR # Controller/MiniOS7/ISaGRAF/4 hely/512KB/2x Ethernet, ICP DAS
    iP-8447 CR # 4 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)


    The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS. Each WP-8xx7 is equipped with an 80186, 80 MHz CPU running a MiniOS7 operating system, a variety of input/output ports (Dual 10/100 Base-TX Ethernet Ports for iP-8x47, one RS-232/485 port, one RS-485 port and two RS-232 ports) and a range of I/O slots (4/8) that can be used to integrate high performance parallel I/O modules (high profile I-8K Series) or serial I/O modules (high profile I-87K series). Users can also choose RS-485 Remote I/O modules (I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules. Compared to I-8xx7, iPAC-8xx7 series is 2 ~ 4 times faster!


    MiniOS7 Embedded Operating System (DOS-like)
    Embedded ISaGRAF Ver.3 SoftLogic
    Support IEC 61131-3 Standard
    Accepts max. 64 KB ISaGRAF code size
    80186 CPU (16-bit & 80 MHz) Support I/O Module Hot Swap
    Dual Battery Backup SRAM (512 KB) Dual 10/100M Ethernet Ports (for iP-8x47)
    64-bit Hardware Serial Number for Protection 4 Serial Ports (RS-232/485)
    4/8 I/O Expansion Slots (support High Profile I/O Modules) Redundant Power Inputs


    Models iP-8417 iP-8817 iP-8447 iP-8847
    System Software
    OS MiniOS7 (DOS-like embedded operating system)
    Development Software
    ISaGRAF Software ISaGRAF Ver. 3 IEC 61131-3 standard
    Languages LD, ST, FBD, SFC, IL & FC
    Max. Code Size 64 KB
    Scan Time 2 ~ 25 ms  for normal program
    10 ~ 125 ms  (or more) for complex or large program
    CPU Module
    CPU 80186, 80 MHz
    SRAM 512 KB 768 KB
    Flash 512 KB; with Write Protect Switch
    microSD Expansion Yes (but ISaGRAF doesn't support)
    Dual Battery Backup SRAM 512 KB; data valid up to 5 years (for retain variables)
    EEPROM 16 KB
    NVRAM 31 bytes (battery backup, data valid up to 5 years)
    RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
    64-bit Hardware Serial Number Yes, for Software Copy Protection
    Watchdog Timers Yes (0.8 second)
    DIP Switch Yes (8 bits)
    Communication Ports
    Ethernet - RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
    COM 0 Internal communication with the high profile I-87K series modules in slots
    COM 1 RS-232 (to update firmware) (RxD, TxD and GND); non-isolated
    COM 2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 3000 VDC isolated
    COM 3 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485); 
    COM 4 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated
    LED Display Yes, 5-Digit
    Programmable LED Indicators 3
    Push Buttons 4
    Buzzer - - Yes
    I/O Expansion Slots
    Slot Number 4 8 4 8
    Note: For High Profile I-8K and I-87K Modules Only
    Data Bus 8/16 bits
    Address Bus Range 2 K for each slot
    Dimensions (W x L x H) 231 mm x 132 mm x 111 mm: iP-8417, iP-8447
    355 mm x 132 mm x 111 mm
    : iP-8817, iP-8847
    Installation DIN-Rail or Wall Mounting
    Operating Temperature -25 ~ +75°C
    Storage Temperature -30 ~ +80°C
    Ambient Relative Humidity 10 ~ 90% RH (non-condensing)
    Input Range +10 ~ +30 VDC
    Isolation 1 kV
    Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm
    Capacity 30 W 30 W 30 W 30 W
    Consumption 6.7 W 7.2 W 6.7 W 7.2 W
    Protocols  (Note that certain protocols require optional devices)
    NET ID 8 bits DIP switch to assign NET ID as 1 ~ 255
    Modbus RTU/ASCII Master A max. of 2 ports: COM1~5. (To connect to other Modbus Slave devices.) 
    A max. of Modbus_xxx Function Block amount for 2 ports: 128.  
    Modbus RTU Slave A max. of 2 ports: COM1 and one of COM2 ~ 3. 
    (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.)
    Modbus TCP/IP Slave (For iP-8x47 only) Two Ethernet ports support Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI up to 6 connections. 
    User-defined Protocol Custom protocols can be applied at COM1~20 using Serial communication function blocks.  (*)
    Remote I/O One of COM2 ~ 4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC.
    Fbus Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs.
    Ebus (LAN2: upper port of iP-8x47 ONLY)
    Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port.
    Send Email (For iP-8x47 only)
    Provide functions to send email to a max. of 10 receivers with a single attached file via the Ethernet port through internet. The max. of file size is about 488 KB.
    SMS: Short Message Service One of COM4 ~ 5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. (*)
    Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
    Modem Link COM4 can connect a general Modem. Supports PC to remotely download & monitor the controller.
    MMICON/LCD One of COM3 or COM4 supports ICP DAS’s MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.
    Redundant Bus7000 Two ISaGRAF PACs can link to remote I-7000 & I-87K High profile I/O modules at the same time. 
    Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os.
    CAN/CANopen COM1 or COM3 ~ 12 can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One iP-8xx7 supports a max. of 3 RS-232 ports to connect a max. of 3 I-7530. (*) (FAQ-086)  
    FRnet I/O Enable a max. of 4 pcs. I-8172W boards to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. (Max. 1024-ch. DI + 1024-ch. DO) (FAQ-082154)
    FTP Client Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC. (FAQ-151)
    Optional I/O Functions  (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list)
    PWM Output High Speed PWM Module I-8088W, 8-ch PWM outputs, software support 1 Hz ~ 100 kHz (non-continuous), 
    duty: 0.1 ~ 99.9%
    DO Module as PWM 8-ch max. for one controller. 500 Hz max. 
    For Off=1 & On=1 ms Output Square Curve: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms.
    Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. 
    (Relay Output boards cannot generate fast square wave)
    Parallel DI Counter 8-ch. max. for 1 controller. Counter Val: 32-bit.; 500 Hz max. 
    Min. ON & OFF width must > 1 ms 
    Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
    Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit)
    Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
    Remote DI Counter All remote I-7000/I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535
    High Speed Counter I-87082W: 100 kHz max. 32-bit;   
    I-8084W: 250 kHz max. 32-bit
    Encoder I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for
                  pulse/direction and cw/ccw input mode. (FAQ-112)
    I-8084W: 250 kHz max. , 4-ch encoder, can be Dir/Pulse, or Up/Down or A/B phase
                  (Quad. mode); Not support Encoder Z-index. (FAQ-100)
    Frequency I-87082W: 2-ch, 1 Hz ~ 100 kHz;  
    I-87088W: 8-ch, 1 Hz ~ 100 kHz;  
    I-8084W: 8-ch, 1 Hz ~ 250 kHz;
    Motion Motion Control Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control.
    * Note: The COM5 ~ COM20 ports are located in the expansion boards if they are installed in slots 0 ~ 7 of iP-8xx7. 
    * ISaGRAF FAQ: www.icpdas.com > Support > FAQ > ISaGRAF Soft-Logic PAC
    ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.  
    TOP | HOME
    iP-8417 CR 4 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)
    iP-8817 CR 8 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)
    iP-8447 CR 4 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS)
    iP-8847 CR 8 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS)
    iP-GUP-17000 : Upgrade the iP-8xx1 to become iP-8xx7
    ISaGRAF Development Software
    ISaGRAF-256 ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle
    ISaGRAF-32 ISaGRAF Workbench Software Ver.3 (32 I/O Tags)
    Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available. 
    (ISaGRAF-32 can be used to control more than 32 I/O tags. Please refer to Ch. 3.4 of the ISaGRAF User Manual.)


      s!nus-elektrotechnikai bt.

      Industrial IT & Automation


    24 éves jubileum / 24 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 


    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter


    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.


    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.