iP-8817 # Controller/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS

iP-8817 CR # Controller/MiniOS7/ISaGRAF/8 hely/512KB, ICP DAS
iP-8817 CR # 8 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS)

The ISaGRAF iPAC-8000 Series (iP-8417/8817/8447/8847) is the ISaGRAF SoftLogic PAC from ICP DAS. Each WP-8xx7 is equipped with an 80186, 80 MHz CPU running a MiniOS7 operating system, a variety of input/output ports (Dual 10/100 Base-TX Ethernet Ports for iP-8x47, one RS-232/485 port, one RS-485 port and two RS-232 ports) and a range of I/O slots (4/8) that can be used to integrate high performance parallel I/O modules (high profile I-8K Series) or serial I/O modules (high profile I-87K series). Users can also choose RS-485 Remote I/O modules (I-7000 series) or expansion units (RU-87Pn or I-87Kn) plugged with high profile I-87K serial I/O modules. Compared to I-8xx7, iPAC-8xx7 series is 2 ~ 4 times faster!

MiniOS7 Embedded Operating System (DOS-like) Embedded ISaGRAF Ver.3 SoftLogic Support IEC 61131-3 Standard Accepts max. 64 KB ISaGRAF code size

80186 CPU (16-bit & 80 MHz) Support I/O Module Hot Swap Dual Battery Backup SRAM (512 KB) Dual 10/100M Ethernet Ports (for iP-8x47) 64-bit Hardware Serial Number for Protection 4 Serial Ports (RS-232/485) 4/8 I/O Expansion Slots (support High Profile I/O Modules) Redundant Power Inputs   Models iP-8417 iP-8817 iP-8447 iP-8847 System Software OS MiniOS7 (DOS-like embedded operating system) Development Software ISaGRAF Software ISaGRAF Ver. 3 IEC 61131-3 standard Languages LD, ST, FBD, SFC, IL & FC Max. Code Size 64 KB Scan Time 2 ~ 25 ms  for normal program 10 ~ 125 ms  (or more) for complex or large program CPU Module CPU 80186, 80 MHz SRAM 512 KB 768 KB Flash 512 KB; with Write Protect Switch microSD Expansion Yes (but ISaGRAF doesn't support) Dual Battery Backup SRAM 512 KB; data valid up to 5 years (for retain variables) EEPROM 16 KB NVRAM 31 bytes (battery backup, data valid up to 5 years) RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year 64-bit Hardware Serial Number Yes, for Software Copy Protection Watchdog Timers Yes (0.8 second) DIP Switch Yes (8 bits) Communication Ports Ethernet - RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) COM 0 Internal communication with the high profile I-87K series modules in slots COM 1 RS-232 (to update firmware) (RxD, TxD and GND); non-isolated COM 2 RS-485 (Data+, Data-) with internal self-tuner ASIC; 3000 VDC isolated COM 3 RS-232/RS-485 (RxD, TxD, CTS, RTS and GND for RS-232, Data+ and Data- for RS-485);  non-isolated COM 4 RS-232 (RxD, TxD, CTS, RTS, DSR, DTR, CD, RI and GND); non-isolated SMMI LED Display Yes, 5-Digit Programmable LED Indicators 3 Push Buttons 4 Buzzer - - Yes I/O Expansion Slots Slot Number 4 8 4 8 Note: For High Profile I-8K and I-87K Modules Only Data Bus 8/16 bits Address Bus Range 2 K for each slot Mechanical Dimensions (W x L x H) 231 mm x 132 mm x 111 mm: iP-8417, iP-8447 355 mm x 132 mm x 111 mm: iP-8817, iP-8847 Installation DIN-Rail or Wall Mounting Environmental Operating Temperature -25 ~ +75°C Storage Temperature -30 ~ +80°C Ambient Relative Humidity 10 ~ 90% RH (non-condensing) Power Input Range +10 ~ +30 VDC Isolation 1 kV Redundant Power Inputs Yes, with one power relay (1 A @ 24 VDC) for alarm Capacity 30 W 30 W 30 W 30 W Consumption 6.7 W 7.2 W 6.7 W 7.2 W Protocols  (Note that certain protocols require optional devices) NET ID 8 bits DIP switch to assign NET ID as 1 ~ 255 Modbus RTU/ASCII Master A max. of 2 ports: COM1~5. (To connect to other Modbus Slave devices.)  A max. of Modbus_xxx Function Block amount for 2 ports: 128.  (*) Modbus RTU Slave A max. of 2 ports: COM1 and one of COM2 ~ 3.  (For connecting ISaGRAF, PC/HMI/OPC Server and HMI panels.) Modbus TCP/IP Slave (For iP-8x47 only) Two Ethernet ports support Modbus TCP/IP Slave Protocol for connecting ISaGRAF & PC/HMI up to 6 connections.  User-defined Protocol Custom protocols can be applied at COM1~20 using Serial communication function blocks.  (*) Remote I/O One of COM2 ~ 4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards, or RU-87Pn + I-87K High Profile I/O boards as remote I/O. A max. of 64 I-7000/87K remote I/O modules can connect to one PAC. Fbus Built-in COM3 Port to exchange data between ICP DAS’s ISaGRAF PACs. Ebus (LAN2: upper port of iP-8x47 ONLY) Used to exchange data between ICP DAS ISaGRAF Ethernet PACs via the Ethernet port. Send Email (For iP-8x47 only) Provide functions to send email to a max. of 10 receivers with a single attached file via the Ethernet port through internet. The max. of file size is about 488 KB. SMS: Short Message Service One of COM4 ~ 5 can link to a GSM Modem to support SMS. The user can request data/control the controller via a cellular phone. The controller can also send data and alarms to the user’s cellular phone. (*) Optional GSM Modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) Modem Link COM4 can connect a general Modem. Supports PC to remotely download & monitor the controller. MMICON/LCD One of COM3 or COM4 supports ICP DAS’s MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float. Redundant Bus7000 Two ISaGRAF PACs can link to remote I-7000 & I-87K High profile I/O modules at the same time.  Only one controller is active to control these Remote I/Os. If one is dead, the other one will take over the control of Remote I/Os. CAN/CANopen COM1 or COM3 ~ 12 can connect to one I-7530 (converter: RS-232 to CAN) to support CAN/CANopen devices and sensors. One iP-8xx7 supports a max. of 3 RS-232 ports to connect a max. of 3 I-7530. (*) (FAQ-086)   FRnet I/O Enable a max. of 4 pcs. I-8172W boards to be used to connect to FRnet I/O modules, such as FR-2053, FR-2057, FR-32R, FR-32P. (Max. 1024-ch. DI + 1024-ch. DO) (FAQ-082, 154) FTP Client Enable the FTP Client to upload files from the PAC to a remote FTP server on a PC. (FAQ-151) Optional I/O Functions  (Refer to the ISaGRAF PAC I/O Selection Guide for I/O Module list) PWM Output High Speed PWM Module I-8088W, 8-ch PWM outputs, software support 1 Hz ~ 100 kHz (non-continuous),  duty: 0.1 ~ 99.9% DO Module as PWM 8-ch max. for one controller. 500 Hz max.  For Off=1 & On=1 ms Output Square Curve: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms. Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W.  (Relay Output boards cannot generate fast square wave) Counters, Encoder, Frequency Parallel DI Counter 8-ch. max. for 1 controller. Counter Val: 32-bit.; 500 Hz max.  Min. ON & OFF width must > 1 ms  Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W. Serial DI Counter Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit) Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W. Remote DI Counter All remote I-7000/I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535 High Speed Counter I-87082W: 100 kHz max. 32-bit;    I-8084W: 250 kHz max. 32-bit Encoder I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for               pulse/direction and cw/ccw input mode. (FAQ-112) I-8084W: 250 kHz max. , 4-ch encoder, can be Dir/Pulse, or Up/Down or A/B phase               (Quad. mode); Not support Encoder Z-index. (FAQ-100) Frequency I-87082W: 2-ch, 1 Hz ~ 100 kHz;   I-87088W: 8-ch, 1 Hz ~ 100 kHz;   I-8084W: 8-ch, 1 Hz ~ 250 kHz; Motion Motion Control Can integrate with one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control. * Note: The COM5 ~ COM20 ports are located in the expansion boards if they are installed in slots 0 ~ 7 of iP-8xx7.  * ISaGRAF FAQ: www.icpdas.com > Support > FAQ > ISaGRAF Soft-Logic PAC * ICP DAS recommends using NS-205/NS-208 or RS-405/408 (Ring Switch) Industrial Ethernet Switches.     TOP | HOME iP-8417 CR 4 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS) iP-8817 CR 8 slots, Faster CPU, ISaGRAF based iPAC-8000 (RoHS) iP-8447 CR 4 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS) iP-8847 CR 8 slots, Faster CPU, Dual Ethernet ISaGRAF based iPAC-8000 (RoHS) iP-GUP-17000 : Upgrade the iP-8xx1 to become iP-8xx7   ISaGRAF Development Software ISaGRAF-256 ISaGRAF Workbench Software Ver.3 (256 I/O Tags) with one USB Dongle ISaGRAF-32 ISaGRAF Workbench Software Ver.3 (32 I/O Tags) Note: No upgrade service from ISaGRAF-32 to ISaGRAF-256 is available.  (ISaGRAF-32 can be used to control more than 32 I/O tags. Please refer to Ch. 3.4 of the ISaGRAF User Manual.)

Bővített forgalmazói/gyártói információk (EU 2023/988 rendelet)

Kereskedelmi név: SINUS-ELEKTROTECHNIKAI BT.
Postai cím: 9028 Győr, Móra tér 17.
Elektronikus cím: https://www.s-e.hu/

RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

RS-232 - WiFi konverter, RS-485 - WiFi konverter,

ICP CON konverter    USR IOT konverter

Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

© 2018-2025  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.