Kategóriák

   

 

Szűrés
Gyártó
Kategóriák
Hírlevél
Tanúsítvány
SSL Certificate
Ajándékot keres?

Házhozszállítás

Termék részletek


FX-USB-AW # MITSUBISHI MELSEC FX PLC programozó kábel/USB/RS-422

Rendelésre 10-15 munkanap
Raktárkészlet: NINCS
FX-USB-AW # MITSUBISHI MELSEC FX PLC programozó kábel/USB/RS-422
  • FX-USB-AW # MITSUBISHI MELSEC FX PLC programozó kábel/USB/RS-422
  • FX-USB-AW # MITSUBISHI MELSEC FX PLC programozó kábel/USB/RS-422
18 800 Ft 23 876 Ft
  • FX-USB-AW # MITSUBISHI FX PLC programozó kábel/USB
  • FX-USB-AW # MITSUBISHI FX SERIES PLC PROGRAMMING CABLE
  • USB/RS-422 interfész Mitsubishi FX3U/FX2N/FX1N/FX0/FX0S/FX1S sorozatú PLC, 2,5 méter, kommunikáció kijelzéssel, a leghoszabb távolság 2 km (RS-422 vonalerősítővel növelhető)
  • Támogatott FX-USB-AW operációs rendszer: Windows2000/XP (WinNT4/95/98/Me/DOS nem )
  • Támogatott FX-USB-AW programozó szoftver verzió: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 és újabb
  • Teljesen kompatibilis USB V1.1 és USB CDC V1.1 specifikációval
  • USB-busz táplált, áramfelvétel 50 mA
  • Adatsebesség: 300 bps ~ 1Mbps, automatikus
  • Támogatott UART adat formátum: data bitek: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
  • Támogatja a hosszú távolságú adatkommunikációt, a leghosszabb kommunikációs távolság 2000 méter (9600 bps)
  • 2000 méter felett RS-422 vonalerősítő szükséges pl. I-7510A, I-7510AR
  • Az USB kábel nem hosszabbítható!
  • Egy PC egy USB programozó kábelt támogat
  • Működési hőmérséklet: -20°C ~ +75°C
  • Kábelhossz: 2.5 méter
  • Szín: fekete
  • Csomag tartalma
  •     FX-USB-AW
  •     CD

FIGYELEM!
A PC a PLC vagy ezen berendezések kábelének helytelen üzembehelyezése okozhatja a termékek
meghibásodását. Az ön felelőssége, hogy biztosítsa a megfelelő üzembehelyezést.
A gyártó semmilyen felelősséget nem vállal a helytelen üzembehelyezés által károsodott termékekre!

  • Mitsubishi FX series PLC programming cable. FX-USB-AW

    Mitsubishi FX series USB PLC programming interface conversion cable.

    USB/RS422 interface for Mitsubishi FX3U/FX2N/FX1N/FX0/FX0S/FX1S series PLC, 2.5 meters, with communication indicator, the largest communications range is up to 2Km.

    Summary: 
    FX-USB-AW is the programming cable in which USB interface provided both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status. 
    FX-USB-AW is applicable to the FX3U series PLC which has the MD8F radio socket of Mitsubishi, such as FX3U/FX2N/FX1N/FX0/FX0N/FX0S/FX1S, and it can substitute the FX-232AW module. The largest communications distance is two kilometers. 
    Do choose the USB-SC09 programming cable, for A and all FX series Mitsubishi PLC (including the old products FX2/FX2C). 
    FX-USB-AW principle and figure structure:
    FX-USB-AW programming cable simulate USB port as traditional serial port(usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.
    Features and technological index: 
    - Support FX-USB-AW operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
    - Support FX-USB-AW programming software version: FXGP / WIN V1.0GPP V4.0GX Developer V7.0 and above.
    - Fully compatible with USB V1.1 norms and USB CDC V1.1
    - USB-bus powered, with current consumption of 50 mA
    - Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
    - Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
    - Support long-distance communications, the largest communications is two kilometers (9600 bps)
    - Each PC only supports one USB cable programming
    - Working temperature: -20 ~ +75C 
    - Cable length: 2.5m; Color: black 
    System requirement 
    Please make sure your PC is IBM PC compatible and has the following system requirements before using the USB programming cable.
    - Intel is compatible with 586DX4-100MHz CPU or higher
    - A standard USB port (4-pin A plug)
    - Operating system is Windows2000 or Windows XP

     

    Setting of GX Developer
    After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” ofWindow.
    The next step is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings.
    And the following steps are exactly thesame as the traditional programming cables with RS232 interfaces.Note: DB25M plugs and MD8M plugs of the RS422 interface can not be usedat the same time.
    Open the main windows form (GX Developer), choose “Online” menu then click “Transfer Setup” and will appear “Transfer Setup” window.
    Click “Serial” button of the PC side I/F, and choice the COM X interface as it inthe Device Manager.

     

    About Long Distance Communication


    For FX-USB-AW, The largest communication distance is up to two kilometers (9600 bps). The user must follow the self-made plan to extend cable. Transmission Line should be 0.22mm or more, twisted pair wire. When the distance is over 2,000 m,RS422 repeater could be installed to extend the distance.
    Please Note: USB interface cable cannot be extended.

    Due to internal resistance have been installed in FX-USB-AW and the PLC, no external terminal resistance is needed.
    Usage: 
    USB device drivers should be installed before using FX-USB-AW programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here. 
    After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces. 
    Long-distance communications: 
    the largest communications range between the FX-USB-AW programming cable and the PLC is up to two kilometers (9600 bps). The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm, 2 or more, twisted pair wire. When the distance is over 2000m , RS422 repeater could be installed to extend the distance. 
    Please Note: USB interface cable cannot be extended.

     


     

      s!nus-elektrotechnikai bt.

      Industrial IT & Automation

     

    23 éves jubileum / 23 th Anniversary

     www.s-e.hu    #    www. icpdas.hu

    Email: info@s-e.hu    #   Tel:  96/525530    #    Fax: 96/525531    #    Mobil: 30/9464608 

     

    RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD  Fogyasztásmérés és leolvasás  USB konverter  ICP DAS HUNGARY

    RS-232 - WiFi konverter, RS-485 - WiFi konverter,

    ICP CON konverter    USR IOT konverter

     

    Sinus-Elektrotechnikai Bt.   ICP DAS HUNGARY

    RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC,  Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei,  Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON

    All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

     

    © 2018-2020  Sinus-Elektrotechnikai Bt.  Minden jog fenntartva.

    A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.

     

  • Gyártó
    NONAME OEM
    Raktárkészlet
    NINCS
    Cikkszám
    FX-USB-AW
    Státusz
    Rendelésre 10-15 munkanap