| tET Series |
| tET-P2C2 CR |
Tiny Ethernet module with 2-ch DI and 2-ch DO (NPN, Sink) (RoHS) |
| tET-P2A2 CR |
Tiny Ethernet module with 2-ch DI and 2-ch DO (PNP, Source) (RoHS) |
| tPET Series |
| tPET-P2C2 CR |
Tiny Ethernet module with PoE, 2-ch DI and 2-ch DO (NPN, Sink) (RoHS) |
| tPET-P2A2 CR |
Tiny Ethernet module with PoE, 2-ch DI and 2-ch DO (PNP, Source) (RoHS) |
|
Providing various digital I/O functions, the tET/tPET series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tET/tPET series perfect integration with the HMI, SCADA, PLC and other software systems. The functionality of the tET/tPET series is almost the same as the ET-7000/PET-7000 series. The tET/tPET series tiny Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, photoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the tET/tPET series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.
The tET/tPET series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails.
For maximum space savings, the tET/tPET series is offered in an amazing tiny form-factor that makes it can be easily installed in anywhere, even directly embedded into a machine. It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The tPET series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the tPET series accepts power input from DC adapter.
|
|
Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
Contains a 32-bit MCU that efficiently handles network traffic
10/100 Base-TX Ethernet, RJ-45 x1
(Auto-negotiating, Auto MDI/MDIX, LED Indicator)
Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
Supports UDP responder for device discovery
Supports web configuration and firmware update via Ethernet
Isolated digital input and output
Supports latched DI and 32-bit high-speed counter functions
Supports I/O pair-connection through the Ethernet
Dual-watchdog with power-on and safe value
Tiny form-factor with easy DIN-Rail mounting
RoHS compliant, no Halogen
Low power consumption (about 1.7 W only)
|
|
- Factory, Building and Home Automation
- Remote Maintenance
|
|
|
|
| Models |
tET-P2C2/tET-P2A2 |
tPET-P2C2/tPET-P2A2 |
| System |
| CPU |
32-bit MCU |
| Dual Watchdog |
Yes |
| Communication |
| Ethernet Port |
10/100 Base-TX, 8-Pin RJ-45 x1,
(Auto-negotiating, Auto-MDI/MDIX, LED indicator) |
| - |
PoE (IEEE 802.3af, Class 1) |
| LED Display |
| S1 |
- |
PoE indicator (Green) |
| System indicator (Red) |
| E1 |
Link/Act indicator (Green) |
| 10/100 M indicator (Yellow) |
| Mechanical |
| Dimensions |
52 mm x 27 mm x 98 mm |
| Installation |
DIN-Rail mounting |
| Environment |
| Operating Temperature |
-25 °C ~ +75 °C |
| Storage Temperature |
-30 °C ~ +80 °C |
| Humidity |
10 ~ 90 % RH, non-condensing |
| Power Requirements |
| Power Input |
- |
PoE: IEEE 802.3af, Class 1 |
| Terminal block: +12 ~ 48 VDC (non-regulated) |
| Power Consumption |
- |
|
| |
|
| Models |
tET-P2C2/tPET-P2C2 |
tET-P2A2/tPET-P2A2 |
| Digital Input |
| Input Channels |
2 |
| Input Type (Device) |
Wet Contact (Sink, Source) |
| On Voltage Level |
+10 VDC ~ +50 VDC |
| Off Voltage Level |
+4 VDC max. |
| Input Impedance |
10 k Ohm |
| Counters |
Max. Count |
4,294,967,285 (32 bits) |
| Min. Pulse Width |
0.15 ms |
| Frequency Measurement |
3.5 kHz (without filter) |
| Overvoltage Protection |
+70 VDC |
| Isolation |
3750 Vrms |
| Digital Output |
| Output Channels |
2 |
| Output Type (Module) |
Sink, Open Collector (NPN) |
Source, Open Collector (PNP) |
| Output Voltage |
+5 VDC ~ +30 VDC |
+10 VDC ~ +40 VDC |
| Max. Load Current |
100 mA/channel |
650 mA/channel |
| PWM |
100 Hz Max. (High/Low duty cycle range = 5 ~ 65,535 ms) |
| Over-Voltage |
+60 VDC |
+48 VDC |
| Short Circuit Protection |
- |
Yes |
| Output Isolation |
3750 Vrms |
|
| Note: Because the characteristic of relay, the relay-type modules are not suitable to use PWM for a long time. |
|
| tET Series |
| tET-P2C2 CR |
Tiny Ethernet module with 2-ch DI and 2-ch DO (NPN, Sink) (RoHS) |
| tET-P2A2 CR |
Tiny Ethernet module with 2-ch DI and 2-ch DO (PNP, Source) (RoHS) |
| tPET Series |
| tPET-P2C2 CR |
Tiny Ethernet module with PoE, 2-ch DI and 2-ch DO (NPN, Sink) (RoHS) |
| tPET-P2A2 CR |
Tiny Ethernet module with PoE, 2-ch DI and 2-ch DO (PNP, Source) (RoHS) |
|
|
s!nus-elektrotechnikai bt.
Industrial IT & Automation
|
|
25 éves jubileum / 25 th Anniversary
www.s-e.hu # www. icpdas.hu
Email: info@s-e.hu # Tel: 96/525530 # Fax: 96/525531 # Mobil: 30/9464608
|
RS-232, RS-422, RS-485 konverterek, Ethernet konverterek, RS-485 I/O, Modus I/O, Soros-Ethernet konverterek, USB I/O, Ethernet I/O, Profibus, M-bus, Rádió modem, Ethernet switch, CAN, CANopen, DeviceNet, Profinet, HART, BACnet, EtherCAT, EtherNet/IP, Wireless MBus, DALI, ZigBee, LoRaWan, SIGFOX, IoT, TouchPAD Fogyasztásmérés és leolvasás USB konverter ICP DAS HUNGARY
RS-232 - WiFi konverter, RS-485 - WiFi konverter,
ICP CON konverter USR IOT konverter
Sinus-Elektrotechnikai Bt. ICP DAS HUNGARY
RS-232 konverter, RS-422 konverter, RS-485 konverter, RS-485 repeater, USB konverter, Soros Ethernet konverter, RS-232 Ethernet konverter, RS-422 Ethernet konverter, RS-485 Ethernet konverter, Ipari Ethernet switch, Managed DIN switch, PAC, PLC, HMI, Programozó kábel, Ipari monitor, Ipari éritőképernyős monitor, Ipari PC, Ipari laptop, Ipari tablet, Ipari panel PC, Barebone PC, Mini ITX PC, RS-485 I/O, Profibus I/O modul, Profibus gateway, Profibus konverter, Profibus átjáró, Profibus csatlakozó, Modbus I/O, Ethernet I/O, Modbus gateway, CAN konverter, CAN I/O, CANopen konverter és I/O, DeviceNet konverter és I/O, Hart konverter, Ethernet/IP modul és konverter, BACnet/IP modul és konverter, PROFINET konverter, I/O modul, EtherCAT modul, M-Bus modul, konverter, DALi modul, DALI konverter, PLC programozó kábel, Siemens programozó kábel, WiFi I/O, GSM modem, GPRS modem, SMS küldő, ZigBee konverter, ZigBee I/O, Bluetooth modul, LoRaWAN modul, SIGFOX Modul, IIoT MQTT modul, Média konverter, Touch Pad, Optikai leolvasófej, Analóg, Digitális, Soros PCI kártyák, Épület automatizálás, Ipari tápegység, Ipari kamera, MachineVision, Fogyasztásmérés és elemzés, Földrengés előjelzés, Adatgyűjtés eszközei, Rezgés elemzés, konverter és repeater, Profibus kábel, Profibus csatlakozó, Soros RS-232 RS-485 WiFi konverter, Ipari Gigabit Ethernet switch, WiFi i/o modul, IEC 1107 mérőleolvasás, Optikai leolvasó fej ICP DAS, ICPDAS, ICP CON, MOXA, ADEUNIS, USR IOT, IEI, B+B SmartWorx, ELKO EP, EXSYS, LILLIPUT, STARTECH, PATTON
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
© 2018-2022 Sinus-Elektrotechnikai Bt. Minden jog fenntartva.
A műszaki adatok és információk előzetes értesítés nélkül megváltozhatnak.
